Failed to connect enc28j60 ethernet shield to raspi3

[xhanik]

Hi all,

somehow I got lost in space...
I'm trying to connect enc28j60 ethernet shield to my raspi3 using piCore 9.0.3....
After wiring all together I enabled spi and dtoverlay=enc28j60 in config.txt...
After reboot nothing happend - no module enc28j60 loaded....
A search for enc28j60.ko was also unsuccesfull...

So I tried same setup with Rasbian jessy out of the box just with same settings in config.txt and ethernet shield is working....
So wiring is ok!
Also a search for enc28j60.ko on Rasbian Jessy shows the module present...

Can one confirm enc28j60.ko missing on tinycore 9.0.3....???
Has one enc28j60 up and running on tinycore???

Thanks in advance
xhanik

[bmarkus]

Can one confirm enc28j60.ko missing on tinycore 9.0.3....

Yes, it is missing in piCore-9.0.3

[xhanik]

Thanks bmarkus for very quick replay....

Anything I can do make it run...?
 

[patrikg]

How about to search a little bit in this forum to see how to add kernel module to your own setup.

Like this thread.

http://forum.tinycorelinux.net/index.php/topic,18858.msg129216.html#msg129216