WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Failed to connect enc28j60 ethernet shield to raspi3  (Read 2106 times)

Offline xhanik

  • Newbie
  • *
  • Posts: 2
Failed to connect enc28j60 ethernet shield to raspi3
« on: June 25, 2017, 06:18:13 PM »
Hi all,

somehow I got lost in space...
I'm trying to connect enc28j60 ethernet shield to my raspi3 using piCore 9.0.3....
After wiring all together I enabled spi and dtoverlay=enc28j60 in config.txt...
After reboot nothing happend - no module enc28j60 loaded....
A search for enc28j60.ko was also unsuccesfull...

So I tried same setup with Rasbian jessy out of the box just with same settings in config.txt and ethernet shield is working....
So wiring is ok!
Also a search for enc28j60.ko on Rasbian Jessy shows the module present...

Can one confirm enc28j60.ko missing on tinycore 9.0.3....???
Has one enc28j60 up and running on tinycore???

Thanks in advance
xhanik

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Failed to connect enc28j60 ethernet shield to raspi3
« Reply #1 on: June 25, 2017, 06:25:46 PM »

Can one confirm enc28j60.ko missing on tinycore 9.0.3....???


Yes, it is missing in piCore-9.0.3
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline xhanik

  • Newbie
  • *
  • Posts: 2
Re: Failed to connect enc28j60 ethernet shield to raspi3
« Reply #2 on: June 25, 2017, 06:42:47 PM »
Thanks bmarkus for very quick replay....

Anything I can do make it run...?
 :-[

Offline patrikg

  • Wiki Author
  • Hero Member
  • *****
  • Posts: 693
Re: Failed to connect enc28j60 ethernet shield to raspi3
« Reply #3 on: June 26, 2017, 02:53:28 AM »
How about to search a little bit in this forum to see how to add kernel module to your own setup.

Like this thread.

http://forum.tinycorelinux.net/index.php/topic,18858.msg129216.html#msg129216