WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Thinkpad 390 X frezze at boot  (Read 8465 times)

Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Thinkpad 390 X frezze at boot
« on: May 28, 2011, 03:29:35 AM »
Hello,

got a problem with running TC on IBM Thinkpad 390X (400M,128MRam, 40Ghd, video card NeoMagic MagicMedia 256AV 2,5MRam)

works OK in txt mode :)

When I run X : tinycore vga=7xx...( I tried all relvant opions eg 790,791 etc) laptop freeze. I can't do ctrl-alt-del; if I press caps lock LED doesn't work. I can only do hard power off.

I tried puppy linux and gui works OK, win 98 also works OK.

I read many treads regarding installation and settings but it seems that there is not case like that.





Online Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11512
Re: Thinkpad 390 X freeze at boot
« Reply #1 on: May 28, 2011, 04:05:36 AM »
Hi sigusmund
Type  dmesg > dmesg.txt
Take the file dmesg.txt and attach it to your next post where it says  Addiitional Options.

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14750
Re: Thinkpad 390 X frezze at boot
« Reply #2 on: May 28, 2011, 04:06:08 AM »
Since it looks like Xvesa doesn't work for you, you could try Xorg-7.5.

You might need to google on the name of your graphics hardware AND xorg.conf to get a config that works

Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Re: Thinkpad 390 X freeze at boot
« Reply #3 on: May 28, 2011, 04:50:33 AM »
Hi sigusmund
Type  dmesg > dmesg.txt
Take the file dmesg.txt and attach it to your next post where it says  Addiitional Options.


Hi,

I did dmesg dump. What do we looking for?

I have problem with copy /paste operation since 390X doesn't have LAN interface - LAN is possible with PCMCIA card.

As I can see fom dump it is stated console vga+ 80x25?

Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Re: Thinkpad 390 X frezze at boot
« Reply #4 on: May 28, 2011, 04:53:08 AM »
Hello,

got a problem with running TC on IBM Thinkpad 390X (400M,128MRam, 40Ghd, video card NeoMagic MagicMedia 256AV 2,5MRam)

works OK in txt mode :)

When I run X : tinycore vga=7xx...( I tried all relvant opions eg 790,791 etc) laptop freeze. I can't do ctrl-alt-del; if I press caps lock LED doesn't work. I can only do hard power off.

I tried puppy linux and gui works OK, win 98 also works OK.

I read many treads regarding installation and settings but it seems that there is not case like that.

Update:

Laptop doesn't have LAN interface and uses PCMCIA for internet connection. For installing files CDROM could be used .






Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Re: Thinkpad 390 X frezze at boot
« Reply #5 on: May 28, 2011, 05:05:52 AM »
Since it looks like Xvesa doesn't work for you, you could try Xorg-7.5.

You might need to google on the name of your graphics hardware AND xorg.conf to get a config that works

Video card is supported on Xorg, but I have problems to get it work on 390. Since lack of internet connection I burn CD with Xorg-7.4-dev.tcz. I tried to install it with tcp-load but failed.

I have problem to locate apropriate files for configure xsession -> due to howtos and faq and google it should be on /home/tc/ but there is empy directory.

I tried something with Xfbdev - load it and change Xserver file to fom Xvesa to Xfbdev and then do setup and startx but result was the same- black screen with cursor and laptop freeze.

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14750
Re: Thinkpad 390 X frezze at boot
« Reply #6 on: May 28, 2011, 05:21:02 AM »
Did you try to run xsetup.sh from the prompt with Xvesa?

To use Xorg-7.5, you will need to download, save and then load the following files:

pixman.tcz
fontconfig.tcz
openssl-0.9.8.tcz
Xorg-7.5-bin.tcz
Xorg-7.5-lib.tcz
Xorg-fonts.tcz
expat2.tcz
Xorg-7.5.tcz

Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Re: Thinkpad 390 X frezze at boot
« Reply #7 on: May 28, 2011, 06:25:20 AM »
Hi,

xsetup.sh - of course I did with some frezze results. When I change resolution I get different sizes of cursor, so I thing that configuration is properly read.

By the way - can you explain me why I don't see .xsession in /home/tc directory -> I guess there are  setting sfor Xvesa? Could that be a reason?


And since I am new here could you explain howto download tcz files? If I go to TC download extension page I can see just description of files. However it is advised that application browser should be used - but I have first to bring TS's GUI up and running. ?

I downloaded Xorg-7.4.tczl from http://ftp.nluug.nl/os/Linux/distr/ -> 7.4 is the latest release there.
They don't have other files (pixman etc) in repository.



Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Re: Thinkpad 390 X frezze at boot
« Reply #8 on: May 28, 2011, 06:32:01 AM »
I'm attaching dmesg.txt file

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14750
Re: Thinkpad 390 X frezze at boot
« Reply #9 on: May 28, 2011, 07:33:07 AM »
And since I am new here could you explain howto download tcz files? If I go to TC download extension page I can see just description of files. However it is advised that application browser should be used - but I have first to bring TS's GUI up and running

If you have an Internet connection, you can do it with "tce-load -iw Xorg-7.5"

If you do not have an Internet connection, you need to use a url as follows from elsewhere:

http://distro.ibiblio.org/tinycorelinux/3.x/tcz/extension_name.tcz

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: Thinkpad 390 X frezze at boot
« Reply #10 on: May 28, 2011, 08:50:55 AM »
Hmph, neotragic  ::)

Use forum search, "neomagic"   ;)
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Re: Thinkpad 390 X frezze at boot
« Reply #11 on: May 28, 2011, 09:39:33 AM »
And since I am new here could you explain howto download tcz files? If I go to TC download extension page I can see just description of files. However it is advised that application browser should be used - but I have first to bring TS's GUI up and running

If you have an Internet connection, you can do it with "tce-load -iw Xorg-7.5"

If you do not have an Internet connection, you need to use a url as follows from elsewhere:

http://distro.ibiblio.org/tinycorelinux/3.x/tcz/extension_name.tcz

Hi Juanito,
This is exactly my problem. I could DL those files from another PC, but there is no link for it.
If I follow your link I get http 404 message "page is not found"
I can see just name of file; however I am able to select to DL md5 and info part? I tried this with IE and Firefox


Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Re: Thinkpad 390 X frezze at boot
« Reply #12 on: May 28, 2011, 09:46:11 AM »
Hmph, neotragic  ::)

Use forum search, "neomagic"   ;)

Hi Tinypoodle,

tnx for joining The party :)

As I can see there are two kind of people on forum - those who tried TC out of a box and win and those who are despertly try to overcome problems and quit :)
I checked again for solution in old posts but failed, I guess I don't have knowledge deep enough,yet.
So I must relay on your advises and uncle google.

Do you have any idea how to solve my problem?

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14750
Re: Thinkpad 390 X frezze at boot
« Reply #13 on: May 28, 2011, 09:57:31 AM »
This is exactly my problem. I could DL those files from another PC, but there is no link for it.
If I follow your link I get http 404 message "page is not found"
I can see just name of file; however I am able to select to DL md5 and info part? I tried this with IE and Firefox

I mean like this:

http://distro.ibiblio.org/tinycorelinux/3.x/tcz/pixman.tcz
http://distro.ibiblio.org/tinycorelinux/3.x/tcz/fontconfig.tcz
etc


Offline sigusmund

  • Newbie
  • *
  • Posts: 12
Re: Thinkpad 390 X frezze at boot
« Reply #14 on: May 28, 2011, 10:18:28 AM »
This is exactly my problem. I could DL those files from another PC, but there is no link for it.
If I follow your link I get http 404 message "page is not found"
I can see just name of file; however I am able to select to DL md5 and info part? I tried this with IE and Firefox

I mean like this:

http://distro.ibiblio.org/tinycorelinux/3.x/tcz/pixman.tcz
http://distro.ibiblio.org/tinycorelinux/3.x/tcz/fontconfig.tcz
etc

Thanks for your paintent !!!!
Now it is OK, I will DL, try to installl and report progress. Tnx again!