How to create a simple backup file tcz?

[bigpcman]

In the past I created custom backup file tce extensions by simply using tar and renaming the file to ".tce".

Now I would like to do the same thing (load files to RAM on boot) using the "new" approach in tc v2.8rc3.

I get how to use the copy2fs.flg and copy2fs.lst but I'm not clear on how to create the tcz.  Are these the right steps?

Code: [Select]

mkdir /tmp/package
cp all backup files to /tmp/package
cd /tmp/package
mksquashfs package backup_name.tcz
mv backup_name.tcz ../tce/optional
ln -s ../tce/backup_name.tcz  ../tce/optional/backup_name.tcz


[curaga]

The ln command has them the wrong way around, it should be "ln target linkname".
Otherwise that's it.

[bigpcman]

The ln command has them the wrong way around, it should be "ln target linkname".
Otherwise that's it.

I always seem to do that. Thanks

[gerald_clark]

No, it is 'ln source destination'.

[bigpcman]

No, it is 'ln source destination'.

After thinking about it I missed an obvious part of the process. The backup files need to have  destinations established via a list! So here's another crack at what I think is required:

Code: [Select]

# Establish file backup list using tc builtin tool - add files one by one.
/usr/bin/add2file /tmp/backup_name.lst

# Create tar file from the list.
tar -C / -T /tmp/backup_name.lst -zcf /tmp/backup_name.tar.gz

mkdir /tmp/package

# unpack the tar in package/.
tar -xf /tmp/backup_name.tar.gz -C /tmp/package

# Create tcz file
mksquashfs /tmp/package backup_name.tcz

# Move the tcz and create link
mv /opt/package/backup_name.tcz ../tce/optional
ln -s ../tce/optional/backup_name.tcz ../tce/backup_name.tcz

[vitex]

There is no need to pack and unpack the files using tar; cpio in pass-through mode will copy files based on a list that is either in a file or is generated by a program such as find.

If you install GNU cpio (cpio.tcz), then the following should work assuming each file path begins with "/"

Code: [Select]

cpio -pud /tmp/package </tmp/backup-name.lst
Busybox (or GNU) cpio will work if you remove the initial "/" from each file path and execute

Code: [Select]

( cd / ; cpio -pud /tmp/package </tmp/backup-name.lst )
(Busybox cpio's pass-through mode handling of paths beginning with "/" will be fixed in an upcoming release.)

Also, you need to be in directory /tmp when you invoke mksquashfs if you refer to the directory as "package".

[bigpcman]

There is no need to pack and unpack the files using tar; cpio in pass-through mode will copy files based on a list that is either in a file or is generated by a program such as find.

If you install GNU cpio (cpio.tcz), then the following should work assuming each file path begins with "/"

Code: [Select]

cpio -pud /tmp/package </tmp/backup-name.lst
Busybox (or GNU) cpio will work if you remove the initial "/" from each file path and execute

Code: [Select]

( cd / ; cpio -pud /tmp/package </tmp/backup-name.lst )
(Busybox cpio's pass-through mode handling of paths beginning with "/" will be fixed in an upcoming release.)

Also, you need to be in directory /tmp when you invoke mksquashfs if you refer to the directory as "package".

Thanks for the tip. I have not been able to get busybox cpio to work. I tried:

Code: [Select]

root@box:/tmp# cat backup.lst
home/tc/.Xauthority
home/tc/.Xdefaults
home/tc/.ash_history

root@box:/tmp# cpio -pud package < backup.lst
cpio: home/tc/.Xauthority: No such file or directory

and

root@box:/tmp# cpio -pud /tmp/package < /tmp/ backup.lst
In all cases no files are transfered to /tmp/package.

I'll try ( cd / ; cpio -pud /tmp/package </tmp/backup-name.lst ) next.

[vitex]

Thanks for the tip. I have not been able to get busybox cpio to work. I tried:

Code: [Select]

root@box:/tmp# cat backup.lst
home/tc/.Xauthority
home/tc/.Xdefaults
home/tc/.ash_history

root@box:/tmp# cpio -pud package < backup.lst
cpio: home/tc/.Xauthority: No such file or directory

and

root@box:/tmp# cpio -pud /tmp/package < /tmp/ backup.lst
In all cases no files are transfered to /tmp/package.

I'll try ( cd / ; cpio -pud /tmp/package </tmp/backup-name.lst ) next.

If a file's path does not begin with "/", then cpio fetches the file relative to the current working directory.  Since you executed cpio in /tmp, you were telling cpio to fetch files from /tmp/home/tc/..., which does not exit.  Thus you need to use

Code: [Select]

( cd / ; cpio -pud ... )
so cpio executes in a subshell with "/" as its working directory.  (Using a subshell makes the change to "/" temporary for that command sequence.)

[bigpcman]

If a file's path does not begin with "/", then cpio fetches the file relative to the current working directory.  Since you executed cpio in /tmp, you were telling cpio to fetch files from /tmp/home/tc/..., which does not exit.  Thus you need to use

Code: [Select]

( cd / ; cpio -pud ... )so cpio executes in a subshell with "/" as its working directory.  (Using a subshell makes the change to "/" temporary for that command sequence.)

Thank you vitex for that clarification. So perhaps this will work better for creating a tcz.

Code: [Select]


# Establish file backup list using tc builtin tool - add files one by one.
/usr/bin/add2file /tmp/backup_name.lst

# copy files with full path intact
( cd / ; cpio -pud /tmp/package < /tmp/backup_name.lst )

# Create tcz file
cd /tmp
mksquashfs package backup_name.tcz

# Move the tcz and create link
mv /tmp/package/backup_name.tcz ../tce/optional
ln -s ../tce/optional/backup_name.tcz ../tce/backup_name.tcz
All of this should be done as root user.

edit: I removed the "mkdir /tmp/package" command since cpio does this automatically. Also removed the erroneous leading cd /tmp.