WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: mount error when installing TC  (Read 2061 times)

Offline bobbintb

  • Newbie
  • *
  • Posts: 8
mount error when installing TC
« on: December 22, 2016, 08:27:36 PM »
I installed piCore and followed the instructions in the readme to expand the SD card partition. I am now trying to install the GUI. I ran "tce-load -iw TC" but I get the following error:

Code: [Select]
mount: mounting /dev/loop13 on /tmp/tcloop/aterm failed: Invalid argument
Any idea what I am doing wrong?

Offline bobbintb

  • Newbie
  • *
  • Posts: 8
Re: mount error when installing TC
« Reply #1 on: December 22, 2016, 09:04:20 PM »
PiCore 8 BTW.

Offline beerstein

  • Hero Member
  • *****
  • Posts: 530
Re: mount error when installing TC
« Reply #2 on: December 24, 2016, 09:47:39 AM »
Hi: Try "tce-load -iw TC.tcz" instead

What does this mean: "PiCore 8 BTW."

If nothing works, just reformat sd card and clean sd card with:
$ sudo dd if=/dev/zero of=/dev/sdx bs=1024 seek=544 count=128  (watch out for the exact device name!)
t(w)o be(ers) or not t(w)o be(ers) that is the question

Offline bobbintb

  • Newbie
  • *
  • Posts: 8
Re: mount error when installing TC
« Reply #3 on: December 24, 2016, 01:45:24 PM »
It turns out it's not downloading some files properly. They show up as 0kb. Manually downloaded them but I was still getting a bunch of other errors. When the GUI loaded it would only show the wallpaper and nothing else. I started from scratch and manually downloaded the repo ahead of time. I've still got lots of other problems but at least that one is solved.

I said piCore 8 because that is the version I am using.

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: mount error when installing TC
« Reply #4 on: December 24, 2016, 05:33:08 PM »
What is the free space on /mnt/mmcblk0p2?
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."