WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Enabling 800x480 console framebuffer  (Read 5175 times)

Offline PJE

  • Newbie
  • *
  • Posts: 4
Enabling 800x480 console framebuffer
« on: May 10, 2014, 09:12:23 PM »
Hi All,

Sorry if this is the wrong thread, or has been discussed before. I couldn't find anything which was specific to my requirements.

I have an embedded panel PC with a 7in 800x480 LCD. I'm looking to run a simple SDL application (2D, No sound) on the framebuffer without using X, or a desktop environment. It's almost a kiosk style application.

At present I can currently only select 640x480 via the boot options. I can run the program at 800x480 from a Lubuntu install on the same device.

Any help/direction would be appreciated. I'm looking for the simplest read only linux installations, and Tiny Core in it's minimal form would be ideal if I can get the correct screen resolution.

Thanks.

PJE

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: Enabling 800x480 console framebuffer
« Reply #1 on: May 10, 2014, 09:51:52 PM »
I am not aware of any standard 800x480 vesa mode.
try a vga=ask boot code and see what modes are available.

Offline PJE

  • Newbie
  • *
  • Posts: 4
Re: Enabling 800x480 console framebuffer
« Reply #2 on: May 10, 2014, 10:05:20 PM »
The only non text mode is 640x480. I need to find out how the lubuntu framebuffer can operate at the native resolution.

Sent from my Nexus 7 using Tapatalk


Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11050
Re: Enabling 800x480 console framebuffer
« Reply #3 on: May 11, 2014, 06:41:50 AM »
You didn't mention what's the graphics card?
The only barriers that can stop you are the ones you create yourself.

Offline PJE

  • Newbie
  • *
  • Posts: 4
Re: Enabling 800x480 console framebuffer
« Reply #4 on: May 11, 2014, 09:47:18 PM »
The PC uses an N2700 atom processor. I'm not sure on the graphics core - possibly is GMA3600.

Sent from my VS980 4G using Tapatalk


Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11050
Re: Enabling 800x480 console framebuffer
« Reply #5 on: May 12, 2014, 03:07:29 AM »
Hm, that's a PowerVR chip. Not the best choice for non-Android use.

Lubuntu likely enables the experimental KMS support for that chip. It's still experimental even in the coming 3.15 kernel.  To get it in TC you'll need to build your own kernel.
The only barriers that can stop you are the ones you create yourself.

Offline PJE

  • Newbie
  • *
  • Posts: 4
Re: Enabling 800x480 console framebuffer
« Reply #6 on: May 12, 2014, 08:43:08 PM »
Thanks for the information. I need a system which can run a single full screen 2D SDL application with Ethernet and the ability to allow power off at any time. I have a 10s power buffer to allow any storage to be unmounted, and final data storage.

Is there a guide as how to build a custom kernel with the correct video support?

Sent from my VS980 4G using Tapatalk