WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: abiword do not start  (Read 4185 times)

Offline ibug

  • Jr. Member
  • **
  • Posts: 76
abiword do not start
« on: July 16, 2012, 02:42:26 AM »
abiword do not start (how to run it ?)
I check all *.tcz from
http://distro.ibiblio.org/tinycorelinux/4.x/x86/tcz/abiword.tcz.dep
http://distro.ibiblio.org/tinycorelinux/4.x/x86/tcz/abiword.tcz.tree
and all the 35 md5 files are ok and
it says it need
libglade-2.0.so.0
missing but in libglade.tcz it is so I mount it and copy all of it and it is the same
what is wrong

and why TC456 do not boot from ntfs there are ntfs support in core.gz

and when I download 800MB of *.tcz and add all of it in dfg.lst not in onboot.lst
and boot with lst=dfg.lst it hang after twoo poges of extensions why ?

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: abiword do not start
« Reply #1 on: July 16, 2012, 03:41:52 AM »
1. Use appsaudit to audit your extensions and dependencies.
2. ntfs is not supported in base - though if base will boot or not from ntfs may be a question of your boot loader.
3. Possibly running out of resources??
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11702
Re: abiword do not start
« Reply #2 on: July 16, 2012, 01:25:01 PM »
Hi ibug
Quote
and all the 35 md5 files are ok and
it says it need
libglade-2.0.so.0
missing but in libglade.tcz it is so I mount it and copy all of it and it is the same
what is wrong
Well, you should not need to go to the ibiblio site and manually check the dep and tree files. Either use the size
tab in AppBrowser or use the ab command if you are running Microcore, that will tell you if you are missing any
dependencies. Why are you manually mounting libglade and where are you copying its contents to? It should be
mounted automatically when the abiword application is installed. Are you manually installing extensions and
their dependencies? If so, please use AppBrowser or ab instead.
Quote
and when I download 800MB of *.tcz and add all of it in dfg.lst not in onboot.lst
and boot with lst=dfg.lst it hang after twoo poges of extensions why ?
Are you using any copy2fs files in your /tce directory to copy extensions into RAM? If so, maybe you don't have
enough RAM.

Offline ibug

  • Jr. Member
  • **
  • Posts: 76
Re: abiword do not start
« Reply #3 on: July 17, 2012, 10:51:13 PM »
it is my mistake first I run abiword then when it do not start
I add missing extension and after this it still say it need file ...
so the reason is need 2 add all extensions and dep ... before first run it

the boot loader is syslinux and grub4dos v0.4.4 (stable) and 0.4.6alpha
and the kernel and initrd are loaded good
but after this no extensions are find in hdd so even startx do no start

out of resources - I think not the 800MB of *.tcz need less 2GB RAM
in copy2fs.lst is only 6 *.tcz so it only link all files
I find out the /mnt/*/tce/ondemand/ directory is guilty
I did thousands of items in it

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: abiword do not start
« Reply #4 on: July 18, 2012, 08:23:20 AM »
the boot loader is syslinux and grub4dos v0.4.4 (stable) and 0.4.6alpha
and the kernel and initrd are loaded good
but after this no extensions are find in hdd so even startx do no start
Expectable when using unsupported filesystem.
Quote
out of resources - I think not the 800MB of *.tcz need less 2GB RAM
in copy2fs.lst is only 6 *.tcz so it only link all files
I find out the /mnt/*/tce/ondemand/ directory is guilty
I did thousands of items in it
I said "Possibly running out of resources??", not specifying RAM, but any resources limits which could be hit with such excessive usage.
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline beroje

  • Full Member
  • ***
  • Posts: 130
Re: abiword do not start
« Reply #5 on: August 20, 2012, 12:41:10 PM »
tc@box:~$ version
4.5.6

tc@box:~$ abiword

Open, New, ,,,

GLib (gthread-posix.c): Unexpected error from C library during 'pthread_setspecific': Invalid argument.  Aborting.
Aborted

tc@box:~$ mount
rootfs on / type rootfs (rw,relatime,size=1858412k,nr_inodes=218221)
proc on /proc type proc (rw,relatime)
sysfs on /sys type sysfs (rw,relatime)
devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000)
tmpfs on /dev/shm type tmpfs (rw,relatime)
fusectl on /sys/fs/fuse/connections type fusectl (rw,relatime)
/dev/sda5 on /mnt/sda5 type ext4 (rw,relatime,barrier=1,data=ordered)
/dev/loop0 on /tmp/tcloop/fltk-1.10 type squashfs (ro,relatime)
/dev/loop1 on /tmp/tcloop/Xlibs type squashfs (ro,relatime)
/dev/loop2 on /tmp/tcloop/Xprogs type squashfs (ro,relatime)
/dev/loop3 on /tmp/tcloop/Xvesa type squashfs (ro,relatime)
/dev/loop4 on /tmp/tcloop/jwm type squashfs (ro,relatime)
/dev/loop5 on /tmp/tcloop/wbar type squashfs (ro,relatime)
/dev/loop6 on /tmp/tcloop/eglibc_gconv type squashfs (ro,relatime)
/dev/loop7 on /tmp/tcloop/popt type squashfs (ro,relatime)
/dev/loop8 on /tmp/tcloop/expat2 type squashfs (ro,relatime)
/dev/loop9 on /tmp/tcloop/dbus type squashfs (ro,relatime)
/dev/loop10 on /tmp/tcloop/libcups type squashfs (ro,relatime)
/dev/loop11 on /tmp/tcloop/cups type squashfs (ro,relatime)
/dev/loop12 on /tmp/tcloop/libffi type squashfs (ro,relatime)
/dev/loop13 on /tmp/tcloop/glib2 type squashfs (ro,relatime)
/dev/loop14 on /tmp/tcloop/libgnomecups type squashfs (ro,relatime)
/dev/loop15 on /tmp/tcloop/libart type squashfs (ro,relatime)
/dev/loop16 on /tmp/tcloop/fontconfig type squashfs (ro,relatime)
/dev/loop17 on /tmp/tcloop/libxcb type squashfs (ro,relatime)
/dev/loop18 on /tmp/tcloop/Xorg-7.6-lib type squashfs (ro,relatime)
/dev/loop19 on /tmp/tcloop/pango type squashfs (ro,relatime)
/dev/loop20 on /tmp/tcloop/libxml2 type squashfs (ro,relatime)
/dev/loop21 on /tmp/tcloop/libgnomeprint type squashfs (ro,relatime)
/dev/loop22 on /tmp/tcloop/shared-mime-info type squashfs (ro,relatime)
/dev/loop23 on /tmp/tcloop/graphics-libs-1 type squashfs (ro,relatime)
/dev/loop24 on /tmp/tcloop/gdk-pixbuf2 type squashfs (ro,relatime)
/dev/loop25 on /tmp/tcloop/pixman type squashfs (ro,relatime)
/dev/loop26 on /tmp/tcloop/cairo type squashfs (ro,relatime)
/dev/loop27 on /tmp/tcloop/atk type squashfs (ro,relatime)
/dev/loop28 on /tmp/tcloop/gtk2 type squashfs (ro,relatime)
/dev/loop29 on /tmp/tcloop/ttf-bitstream-vera type squashfs (ro,relatime)
/dev/loop30 on /tmp/tcloop/libglade type squashfs (ro,relatime)
/dev/loop31 on /tmp/tcloop/libgnomecanvas type squashfs (ro,relatime)
/dev/loop32 on /tmp/tcloop/libgnomeprintui type squashfs (ro,relatime)
/dev/loop33 on /tmp/tcloop/fribidi type squashfs (ro,relatime)
/dev/loop34 on /tmp/tcloop/libcroco type squashfs (ro,relatime)
/dev/loop35 on /tmp/tcloop/bzip2-lib type squashfs (ro,relatime)
/dev/loop36 on /tmp/tcloop/libgsf type squashfs (ro,relatime
/dev/loop37 on /tmp/tcloop/librsvg type squashfs (ro,relatime)
/dev/loop38 on /tmp/tcloop/wv type squashfs (ro,relatime)
/dev/loop39 on /tmp/tcloop/abiword type squashfs (ro,relatime)
/dev/loop40 on /tmp/tcloop/libwmf type squashfs (ro,relatime)
/dev/loop41 on /tmp/tcloop/abiword-plugins type squashfs (ro,relatime)
tc@box:~$

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11702
Re: abiword do not start
« Reply #6 on: August 20, 2012, 01:25:43 PM »
Hi beroje
It looks like abiword may need an update, see:
http://forum.tinycorelinux.net/index.php?topic=13277.0

Offline beroje

  • Full Member
  • ***
  • Posts: 130
Re: abiword do not start
« Reply #7 on: August 20, 2012, 02:06:21 PM »
Abiword 2.8 =O.K.

Application Browser CLI Edition

         1. abiword-2.8-dev.tcz
         2. abiword-2.8-doc.tcz
         3. abiword-2.8.tcz
         4. abiword-docs-2.8.tcz
         5. abiword-plugins.tcz
         6. abiword.tcz

Enter selection ( 1 - 6 ) or (q)uit: q
S)earch P)rovides K)eywords or Q)uit:
tc@box:~$


Offline AbNoRMiS

  • Hero Member
  • *****
  • Posts: 550
  • nothing can be impeccable in this imperfect world
    • @ß№®M!$
Re: abiword do not start
« Reply #8 on: August 21, 2012, 11:20:12 PM »
for me abiword 2.6 starts well but through this problem you will forced to use command line
would be better to install abiword 2.8, especially since it requires not much more space than 2.6 with plugins
previously i was unable to compile abiword 2.9.2 but little later i'll try to make version 2.9.3 instead of 2.6
Basic Design Concept © @ß№®M!$
please forgive my terrible english :)