WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Tiny Core v11.0  (Read 36742 times)

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: Tiny Core v11.0
« Reply #30 on: March 20, 2020, 07:33:25 AM »
Hi bjorn
putty doesn't work in version 11
Maybe you could share what error messages you get when you enter the  putty  command?

Offline bjorn

  • Newbie
  • *
  • Posts: 3
Re: Tiny Core v11.0
« Reply #31 on: March 20, 2020, 07:42:00 AM »
putty ran on every version up to 10.1 on 64-bit tinycore. There are no error messages, just a blank screen.

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: Tiny Core v11.0
« Reply #32 on: March 20, 2020, 08:09:07 AM »
Hi bjorn
If you open a terminal, and enter the command  putty , you don't see any error messages in the terminal?

Offline rhermsen

  • Jr. Member
  • **
  • Posts: 95
Re: Tiny Core v11.0
« Reply #33 on: March 20, 2020, 07:04:59 PM »
If you'd like to do a bisect and report the RAM regression to the kernel bugzilla, please do. I think it's quite possible nobody has noticed it yet.
Never looked at bisect before. And a bit rusty on compiling a 'custom' kernel, so not sure if I manage to get into this. I did put this on my todo list.

edit: And the 64-bit kernel is available on the 32-bit edition, for running with large RAM machines, etc.
Thanks for explaining! Wondered already before why sometimes 64bit extensions where present in the 32bit repo.

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core v11.0
« Reply #34 on: March 20, 2020, 10:47:24 PM »
putty ran on every version up to 10.1 on 64-bit tinycore. There are no error messages, just a blank screen.

putty works for me in tc-11.x x86 and x86_64

Offline rhermsen

  • Jr. Member
  • **
  • Posts: 95
Re: Tiny Core v11.0
« Reply #35 on: March 21, 2020, 09:55:26 AM »
Tried a few times more to start a 11.0 VM with just 64MB. First time it failed again, second time the VM booted normally with 64MB.


Code: [Select]
tc@box:~$ version
11.0
tc@box:~$ cat /proc/meminfo
MemTotal:          56056 kB
MemFree:            6864 kB
MemAvailable:       6308 kB
Buffers:             192 kB
Cached:            22016 kB
SwapCached:           20 kB
Active:            17756 kB
Inactive:          17100 kB
Active(anon):      17528 kB
Inactive(anon):    16756 kB
Active(file):        228 kB
Inactive(file):      344 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:             0 kB
HighFree:              0 kB
LowTotal:          56056 kB
LowFree:            6864 kB
SwapTotal:          4480 kB
SwapFree:              4 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:         12644 kB
Mapped:             7748 kB
Shmem:             21636 kB
KReclaimable:       1160 kB
Slab:               5796 kB
SReclaimable:       1160 kB
SUnreclaim:         4636 kB
KernelStack:         464 kB
PageTables:          284 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:       32508 kB
Committed_AS:      44516 kB
VmallocTotal:     958464 kB
VmallocUsed:         652 kB
VmallocChunk:          0 kB
Percpu:              164 kB
AnonHugePages:         0 kB
ShmemHugePages:        0 kB
ShmemPmdMapped:        0 kB
FileHugePages:         0 kB
FilePmdMapped:         0 kB
DirectMap4k:       20472 kB
DirectMap4M:       45056 kB
tc@box:~$


Code: [Select]
tc@box:~$ version
10.1
tc@box:~$ cat /proc/meminfo
MemTotal:          56620 kB
MemFree:            7236 kB
MemAvailable:       9476 kB
Buffers:             324 kB
Cached:            28576 kB
SwapCached:            0 kB
Active:            19096 kB
Inactive:          20200 kB
Active(anon):      17932 kB
Inactive(anon):    17056 kB
Active(file):       1164 kB
Inactive(file):     3144 kB
Unevictable:           0 kB
Mlocked:               0 kB
HighTotal:             0 kB
HighFree:              0 kB
LowTotal:          56620 kB
LowFree:            7236 kB
SwapTotal:          1612 kB
SwapFree:           1612 kB
Dirty:                 0 kB
Writeback:             0 kB
AnonPages:         10388 kB
Mapped:             6972 kB
Shmem:             24604 kB
Slab:               5472 kB
SReclaimable:       1136 kB
SUnreclaim:         4336 kB
KernelStack:         448 kB
PageTables:          252 kB
NFS_Unstable:          0 kB
Bounce:                0 kB
WritebackTmp:          0 kB
CommitLimit:       29920 kB
Committed_AS:      40264 kB
VmallocTotal:     958464 kB
VmallocUsed:           0 kB
VmallocChunk:          0 kB
Percpu:              152 kB
AnonHugePages:         0 kB
ShmemHugePages:        0 kB
ShmemPmdMapped:        0 kB
DirectMap4k:       20472 kB
DirectMap4M:       45056 kB
tc@box:~$




Offline andyj

  • Hero Member
  • *****
  • Posts: 1020
Re: Tiny Core v11.0
« Reply #36 on: March 25, 2020, 03:28:21 PM »
On 64-bit hplip needs to be recompiled against openssl-1.1.1, as it's looking for 1.0 now. This may also be true for 32-bit, but I haven't checked.

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core v11.0
« Reply #37 on: March 26, 2020, 12:25:40 AM »
Having recompiled hplip, it looks like the problem is with ghostscript  :(

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core v11.0
« Reply #38 on: March 26, 2020, 01:37:53 AM »
hplip and ghostscript posted to tc-11.x x86_64 repo

My hp network printer is found automatically and the test page prints , but most of the hp-* commands cannot find the printer..
« Last Edit: March 26, 2020, 06:46:16 AM by Juanito »

Offline Rudock1

  • Jr. Member
  • **
  • Posts: 62
Re: Tiny Core v11.0
« Reply #39 on: March 26, 2020, 10:11:06 AM »
Hi Juanito and Rich,

I use findutils and after upgrading to TC11 I noticed there is an error building the locate database with 'sudo updatedb'  because the sort utility is not found.  I see in the updatedb script on lines 111 and 115 a command to /bin/sort    The error is fixed with changing these two lines to /usr/bin/sort

thx
Billy

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: Tiny Core v11.0
« Reply #40 on: March 26, 2020, 10:40:35 AM »
Hi Rudock1
Looks like a regression from the last update. The info file shows this in the  change-log:
Code: [Select]
                2019/02/20 corrected sort path in updatedb
Current:        2019/11/29 updated 4.6.0 -> 4.7.0
:

I don't understand why  /bin/sort  is not linked to  busybox  like all the other commands.

You didn't specify which architecture, but I suspect x86 and x86_64 are affected since their change-logs both indicate a recent update.

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core v11.0
« Reply #41 on: March 26, 2020, 10:52:25 AM »
<sigh> at least this time I remembered the script needed fixing, I just fixed it to the wrong place - I'll fix the extensions tomorrow.

Offline Rudock1

  • Jr. Member
  • **
  • Posts: 62
Re: Tiny Core v11.0
« Reply #42 on: March 26, 2020, 10:57:41 AM »
Thanks for the quick replies.  Sorry I forgot to say I use Corepure64 , x86_64

Also, I use coreutils.tcz which gives me the GNU sort

thx and good health to all,
Billy

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11178
Re: Tiny Core v11.0
« Reply #43 on: March 26, 2020, 10:59:08 AM »
Hi Juanito
Since the script comes from an outside source, and will likely continue to point to  /bin/sort  in the future, would it make sense to
add a link command in the  tce.installed  file instead of always modifying the script?

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14516
Re: Tiny Core v11.0
« Reply #44 on: March 26, 2020, 11:04:50 AM »
It actually points to /usr/local/bin/sort because coreutils is present at compile time.