and the rest of it, because it don't let me post more than 2000 char.
(--) NV: Found NVIDIA GeForce 8600M GT at 01@00:00:0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/local/lib/X11/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) NV(0): Initializing int10
(II) NV(0): Primary V_BIOS segment is: 0xc000
(--) NV(0): Console is VGA mode 0x3
(II) NV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
(==) NV(0): Depth 24, (--) framebuffer bpp 32
(==) NV(0): RGB weight 888
(==) NV(0): Default visual is TrueColor
(==) NV(0): Using hardware cursor
(==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
(II) NV(0): MMIO registers mapped at 0xb6095000
(--) NV(0): Total video RAM: 256.0 MB
(--) NV(0): BAR1 size: 256.0 MB
(--) NV(0): Mapped memory: 255.0 MB
(II) NV(0): Linear framebuffer mapped at 0xa6195000
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) NV(0): Ignoring unsupported TV output 0
(--) NV(0): Connector map:
(--) NV(0): Bus 3 -> SOR0 (LVDS)
(--) NV(0): Bus 0 -> DAC1
(--) NV(0): Load detection: 279
(II) NV(0): I2C bus "I2C0" initialized.
(II) NV(0): Output VGA1 has no monitor section
(II) NV(0): LVDS native size 1280x800
(II) NV(0): Output LVDS has no monitor section
(II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
(II) NV(0): Probing for EDID on I2C bus 0...
(II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
(II) NV(0): ... none found
(--) NV(0): Trying load detection on VGA1 ... nothing.
(II) NV(0): Probing for EDID on I2C bus 3...
(II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
(--) NV(0): DDC detected a DFP:
(II) NV(0): Manufacturer: LPL Model: 301 Serial#: 0
(II) NV(0): Year: 2007 Week: 0
(II) NV(0): EDID Version: 1.3
(II) NV(0): Digital Display Input
(II) NV(0): Max Image Size [cm]: horiz.: 33 vert.: 21
(II) NV(0): Gamma: 2.20
(II) NV(0): No DPMS capabilities specified
(II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
(II) NV(0): First detailed timing is preferred mode
(II) NV(0): redX: 0.600 redY: 0.351 greenX: 0.324 greenY: 0.554
(II) NV(0): blueX: 0.153 blueY: 0.145 whiteX: 0.312 whiteY: 0.328
(II) NV(0): Manufacturer's mask: 0
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 72.2 MHz Image Size: 331 x 207 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1464 h_border: 0
(II) NV(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) NV(0): Supported detailed timing:
(II) NV(0): clock: 72.2 MHz Image Size: 331 x 207 mm
(II) NV(0): h_active: 1280 h_sync: 1328 h_sync_end 1360 h_blank_end 1464 h_border: 0
(II) NV(0): v_active: 800 v_sync: 803 v_sync_end 809 v_blanking: 823 v_border: 0
(II) NV(0): XU235154W01
(II) NV(0): $2=Eh§˙
(II) NV(0): EDID (in hex):
(II) NV(0): 00ffffffffffff00320c010300000000
(II) NV(0): 00110103802115780ab3409959538d27
(II) NV(0): 25505400000001010101010101010101
(II) NV(0): 010101010101391c00b8502017303020
(II) NV(0): 36004bcf10000019391c00b850201730
(II) NV(0): 302036004bcf10000000000000fe0058
(II) NV(0): 55323335813135345730310a000000fe
(II) NV(0): 0024323d45688ba7ff01010a202000d4
(II) NV(0): EDID vendor "LPL", prod id 769
(II) NV(0): DDCModeFromDetailedTiming: 1280x800 Warning: We only handle separate sync.
(II) NV(0): Output VGA1 disconnected
(II) NV(0): Output LVDS connected
(II) NV(0): Using exact sizes for initial modes
(II) NV(0): Output LVDS using initial mode 1280x800
(II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(--) NV(0): Virtual size is 1280x1280 (pitch 1280)
(**) NV(0): Driver mode "1280x800": 72.2 MHz (scaled from 0.0 MHz), 49.4 kHz, 60.0 Hz
(II) NV(0): Modeline "1280x800"x60.0 72.25 1280 1328 1360 1464 800 803 809 823 -hsync -vsync (49.4 kHz)
(==) NV(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/X11/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/local/lib/X11/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(--) NV(0): 153.75 MB available for offscreen pixmaps
(II) NV(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(==) NV(0): Backing store disabled
(==) NV(0): Silken mouse enabled
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) NV(0): DPMS enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/local/lib/X11/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NV(0): Setting screen physical size to 338 x 211
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: Setting Device option to "/dev/input/mice"
(--) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) acceleration profile 0
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ir"
(**) Generic Keyboard: XkbLayout: "us,ir"
(**) Option "XkbOptions" "grp:switch,grp:alt_shift_toggle,grp_led:scroll"
(**) Generic Keyboard: XkbOptions: "grp:switch,grp:alt_shift_toggle,grp_led:scroll"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Generic Keyboard" (type: KEYBOARD)
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"
(--) NV(0): 156.09 MB available for offscreen pixmaps
(II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(==) NV(0): DPMS enabled
(--) RandR disabled
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/local/lib/X11/modules/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) NV(0): Setting screen physical size to 338 x 211
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(**) <default pointer>: Device: "/dev/input/mice"
(==) <default pointer>: Protocol: "Auto"
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) <default pointer>: Sensitivity: 1
(**) <default pointer>: (accel) keeping acceleration scheme 1
(**) <default pointer>: (accel) acceleration profile 0
(II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
(II) <default pointer>: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Generic Keyboard: always reports core events
(**) Option "Protocol" "standard"
(**) Generic Keyboard: Protocol: standard
(**) Option "XkbRules" "xorg"
(**) Generic Keyboard: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Generic Keyboard: XkbModel: "pc105"
(**) Option "XkbLayout" "us,ir"
(**) Generic Keyboard: XkbLayout: "us,ir"
(**) Option "XkbOptions" "grp:switch,grp:alt_shift_toggle,grp_led:scroll"
(**) Generic Keyboard: XkbOptions: "grp:switch,grp:alt_shift_toggle,grp_led:scroll"
(**) Option "CustomKeycodes" "off"
(**) Generic Keyboard: CustomKeycodes disabled
(II) UnloadModule: "mouse"
(II) UnloadModule: "kbd"