WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Highpoint RocketRAID 1740 SATA controller  (Read 1954 times)

Offline athouston

  • Full Member
  • ***
  • Posts: 143
Highpoint RocketRAID 1740 SATA controller
« on: June 29, 2010, 07:43:07 AM »
I have the above mentioned card which has drivers for Fedora Core (1 through 6), RHEL (3 through 4U4), SLES (9 and 10), SuSE (8.1 through 10.1) and FreeBSD 4.3 through 6).

Can I use any of these in TinyCore and how do I load the driver please?

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11044
Re: Highpoint RocketRAID 1740 SATA controller
« Reply #1 on: June 29, 2010, 09:29:30 AM »
Looks like the plain sata is supported by sata_mv (included in TC). Not sure if that supports the raid abilities of the card; at least linux sw raid is available in any case.

For use with TC you should probably build the open source driver they offer.
The only barriers that can stop you are the ones you create yourself.

Offline athouston

  • Full Member
  • ***
  • Posts: 143
Re: Highpoint RocketRAID 1740 SATA controller
« Reply #2 on: June 29, 2010, 06:56:19 PM »
TC sees all four drives on the card as separate drives when I install and I have the RAID5 array configured in the card BIOS. I'm not familiar (yet) with sata_mv.

I thought about swRAID but I want the performance. This card is pretty quick so it fits the TC ethos nicely.

I am relatively new to LINUX generally and especially TC so rebuilding the open source driver is beyond me at this point. Can you point me to doco on doing this and I'll have a go. ALternatively is there anyone who does (or can do) this.

Thanks.

Offline gerald_clark

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4254
Re: Highpoint RocketRAID 1740 SATA controller
« Reply #3 on: June 29, 2010, 07:24:38 PM »
Don't bother with the fakeraid drivers. They are not any faster than  mdRAID.