WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Storage expansion drives in Aspire One  (Read 9216 times)

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: Storage expansion drives in Aspire One
« Reply #15 on: February 19, 2009, 02:18:16 PM »
The issue you are now facing is not really a mnttool concern but fstab instead.
mnttool uses fstab for mount options.

fstab does not "see" your mmc device as vfat and therefore uses "auto" as the fstype and hence no umask=000

What does fdisk -l show for your mmc device?
10+ Years Contributing to Linux Open Source Projects.

Offline ^thehatsrule^

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 1726
Re: Storage expansion drives in Aspire One
« Reply #16 on: February 19, 2009, 02:26:57 PM »
Those dirs are probably not created if the modules weren't loaded yet.

afaik mtab shows mounted stuff, so there's no use looking in there.

You could test it out first after replacing the line in fstab, i.e. with `mount /mnt/mmcblk0p1 `

Offline Onyarian

  • Sr. Member
  • ****
  • Posts: 337
Re: Storage expansion drives in Aspire One
« Reply #17 on: February 19, 2009, 03:30:48 PM »
After boot and mmc.tce loaded during boot, and with /mnt/mmcblk0p1 created, the fdisk -l don't detect mmc drive:
Quote
tc@box:~$ fdisk -l

Disk /dev/hdc: 8069 MB, 8069677056 bytes
255 heads, 63 sectors/track, 981 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/hdc1   *           1         850     6827593+ 83 Linux
/dev/hdc2             851         981     1052257+ 82 Linux swap

Disk /dev/sda: 1048 MB, 1048576000 bytes
255 heads, 63 sectors/track, 127 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes

   Device Boot      Start         End      Blocks  Id System
/dev/sda1   *           1         127     1020096   b Win95 FAT32

But now seems to work when I substitute in fstab
Quote
/dev/mmcblk0p1  /mnt/mmcblk0p1  auto     noauto,users,exec,umask=000    0 0 # Added by TC
with
Quote
/dev/mmcblk0p1  /mnt/mmcblk0p1  vfat     noauto,users,exec,umask=000    0 0 # Added by TC

Thanks to both!