WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Xorg Promble in tinycore 2.11  (Read 3581 times)

Offline dsara35

  • Newbie
  • *
  • Posts: 49
Xorg Promble in tinycore 2.11
« on: May 16, 2010, 12:32:13 AM »
Im using tinycore 2.11 newly only for wine-gl.tcz.. using pendrive i boot it, after i install wine-gl using app browser it get install and i can work in wine.. but i want to remastering the image so as wiki dynamic remastering i copy the optional and onboot.lst to /opt/tce after i create image and boot but it not enter to gui ,it entering to prompt  mode after i enter startx it showing error in xorg.. im giving the Xorg.lo
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29.1-tinycore i686
Current Operating System: Linux box 2.6.29.1-tinycore #1337 SMP Fri Apr 10 19:12:39 EEST 2009 i686
Build Date: 25 April 2009  08:42:34PM
 
   Before reporting problems, check www.tinycorelinux.com
   to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
   (++) from command line, (!!) notice, (II) informational,
   (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun May 16 09:38:00 2010
(II) Loader magic: 0x7abc
(II) Module ABI versions:
   X.Org ANSI C Emulation: 0.4
   X.Org Video Driver: 5.0
   X.Org XInput driver : 4.0
   X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 2

(--) PCI:*(0@0:2:0) unknown vendor (0x8086) unknown chipset (0x27ae) rev 3, Mem @ 0xf0000000/524288, 0xd0000000/268435456, 0xf0200000/262144, I/O @ 0x00001800/8
(--) PCI: (0@0:2:1) unknown vendor (0x8086) unknown chipset (0x27a6) rev 3, Mem @ 0xf0080000/524288
(==) Using default built-in configuration (39 lines)
(==) --- Start of built-in configuration ---
   Section "Device"
      Identifier   "Builtin Default intel Device 0"
      Driver   "intel"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default intel Screen 0"
      Device   "Builtin Default intel Device 0"
   EndSection
   Section "Device"
      Identifier   "Builtin Default i810 Device 0"
      Driver   "i810"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default i810 Screen 0"
      Device   "Builtin Default i810 Device 0"
   EndSection
   Section "Device"
      Identifier   "Builtin Default vesa Device 0"
      Driver   "vesa"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default vesa Screen 0"
      Device   "Builtin Default vesa Device 0"
   EndSection
   Section "Device"
      Identifier   "Builtin Default fbdev Device 0"
      Driver   "fbdev"
   EndSection
   Section "Screen"
      Identifier   "Builtin Default fbdev Screen 0"
      Device   "Builtin Default fbdev Device 0"
   EndSection
   Section "ServerLayout"
      Identifier   "Builtin Default Layout"
      Screen   "Builtin Default intel Screen 0"
      Screen   "Builtin Default i810 Screen 0"
      Screen   "Builtin Default vesa Screen 0"
      Screen   "Builtin Default fbdev Screen 0"
   EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
   Using a default monitor configuration.
(**) |-->Screen "Builtin Default i810 Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default i810 Device 0"
(==) No monitor specified for screen "Builtin Default i810 Screen 0".
   Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
   Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (3)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
   Using a default monitor configuration.
(==) Not automatically adding devices
(==) Not automatically enabling devices
(WW) The directory "/usr/local/lib/X11/fonts/OTF" does not exist.
   Entry deleted from font path.
(WW) The directory "/usr/local/lib/X11/fonts/100dpi/" does not exist.
   Entry deleted from font path.
(==) FontPath set to:
   /usr/local/lib/X11/fonts/misc/,
   /usr/local/lib/X11/fonts/TTF/,
   /usr/local/lib/X11/fonts/Type1/,
   /usr/local/lib/X11/fonts/75dpi/,
   built-ins
(==) ModulePath set to "/usr/local/lib/X11/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
   Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
   Using the default keyboard configuration.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
   
  • -1   0   0xffffffff - 0xffffffff (0x1) MX
  • [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(II) LoadModule: "extmod"
(II) Loading /usr/local/lib/X11/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/local/lib/X11/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 1.0.0
   Module class: X.Org Server Extension
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/local/lib/X11/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "dri"
(II) Loading /usr/local/lib/X11/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 1.0.0
   ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"
(II) Loading /usr/local/lib/X11/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 2.7.0
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "i810"
(WW) Warning, couldn't open module i810
(II) UnloadModule: "i810"
(EE) Failed to load module "i810" (module does not exist, 0)
(II) LoadModule: "vesa"
(II) Loading /usr/local/lib/X11/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 2.2.0
   Module class: X.Org Video Driver
   ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(II) Loading /usr/local/lib/X11/modules/drivers//fbdev_drv.so
(II) Module fbdev: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 0.4.0
   ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/local/lib/X11/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 1.4.0
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/local/lib/X11/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 1.3.2
   Module class: X.Org XInput Driver
   ABI class: X.Org XInput driver, version 4.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
   i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
   E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
   965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
   Mobile IntelĀ® GM45 Express Chipset,
   Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) VESA: driver for VESA chipsets: vesa
(II) FBDEV: driver for framebuffer: fbdev
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
   
  • -1   0   0xffffffff - 0xffffffff (0x1) MX
  • [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [5] -1   0   0x00000000 - 0x00000000 (0x1) IX
(WW) Falling back to old probe method for vesa
(WW) Falling back to old probe method for fbdev
(II) Loading sub module "fbdevhw"
(II) LoadModule: "fbdevhw"
(II) Loading /usr/local/lib/X11/modules/linux//libfbdevhw.so
(II) Module fbdevhw: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 0.0.2
   ABI class: X.Org Video Driver, version 5.0
(EE) open /dev/fb0: No such device
(II) resource ranges after probing:
   
  • -1   0   0xffffffff - 0xffffffff (0x1) MX
  • [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] 0   0   0x000a0000 - 0x000affff (0x10000) MS
   [5] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS
   [6] 0   0   0x000b8000 - 0x000bffff (0x8000) MS
   [7] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [8] -1   0   0x00000000 - 0x00000000 (0x1) IX
   [9] 0   0   0x000003b0 - 0x000003bb (0xc) IS
   [10] 0   0   0x000003c0 - 0x000003df (0x20) IS
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/local/lib/X11/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 0.1.0
   ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Creating default Display subsection in Screen section
   "Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
(--) intel(0): Chipset: "945GME"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xF0000000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): EDID vendor "HSD", prod id 1001
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1024x600
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/local/lib/X11/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 1.0.0
   ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/local/lib/X11/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
   compiled for 1.6.1, module version = 2.4.0
   ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(II) UnloadModule: "vesa"
(II) Unloading /usr/local/lib/X11/modules/drivers//vesa_drv.so
(II) UnloadModule: "fbdev"
(II) Unloading /usr/local/lib/X11/modules/drivers//fbdev_drv.so
(II) UnloadModule: "fbdevhw"
(II) Unloading /usr/local/lib/X11/modules/linux//libfbdevhw.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
   
  • -1   0   0xffffffff - 0xffffffff (0x1) MX
  • [1] -1   0   0x000f0000 - 0x000fffff (0x10000) MX

   [2] -1   0   0x000c0000 - 0x000effff (0x30000) MX
   [3] -1   0   0x00000000 - 0x0009ffff (0xa0000) MX
   [4] 0   0   0x000a0000 - 0x000affff (0x10000) MS(OprD)
   [5] 0   0   0x000b0000 - 0x000b7fff (0x8000) MS(OprD)
   [6] 0   0   0x000b8000 - 0x000bffff (0x8000) MS(OprD)
   [7] -1   0   0x0000ffff - 0x0000ffff (0x1) IX
   [8] -1   0   0x00000000 - 0x00000000 (0x1) IX
   [9] 0   0   0x000003b0 - 0x000003bb (0xc) IS(OprU)
   [10] 0   0   0x000003c0 - 0x000003df (0x20) IS(OprU)
(EE) GARTInit: Unable to open /dev/agpgart (No such device)
(EE) intel(0): /dev/agpgart is either not available, or no memory is available
for allocation.  Please enable agpgart
.(WW) intel(0): VideoRam reduced to 7928 KB (page aligned - was 7931 KB)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: open result is -1, (No such device or address)
drmOpenDevice: Open failed
[drm] failed to load kernel module "i915"
(EE) [drm] drmOpen failed.
(EE) intel(0): [dri] DRIScreenInit failed. Disabling DRI.
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 7928 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(EE) intel(0): AGP GART support is either not available or cannot be used.
   Make sure your kernel has agpgart support or has
   the agpgart module loaded.
(II) intel(0): Tiled allocation failed.
(WW) intel(0): Couldn't allocate tiled memory, fb compression disabled
(II) intel(0): Attempting memory allocation with untiled buffers.
(EE) intel(0): AGP GART support is either not available or cannot be used.
   Make sure your kernel has agpgart support or has
   the agpgart module loaded.
(II) intel(0): Untiled allocation failed.
(EE) intel(0): Couldn't allocate video memory

Fatal server error:
AddScreen/ScreenInit failed for driver 0


Please consult the TinyCore Linux support
    at www.tinycorelinux.com
 for help.
Please also check the log file at "/var/log/Xorg.0.log" for additional information.

/table]


Please any one help in this problem...........................................???????????????????
D.Saravanan

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14817
Re: Xorg Promble in tinycore 2.11
« Reply #1 on: May 16, 2010, 12:45:58 AM »
Does Xorg-7.4 work in the standard tc - i.e. without remastering?

You look to have an intel graphics chipset, which usually don't work well confless - do you have a working xorg.conf for use with the remastered tc?

Offline dsara35

  • Newbie
  • *
  • Posts: 49
Re: Xorg Promble in tinycore 2.11
« Reply #2 on: May 16, 2010, 02:19:15 AM »
Ya its working well in tc i.e without remastering.... Pl say clearly bcoz im new to this Xorg......................
D.Saravanan

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14817
Re: Xorg Promble in tinycore 2.11
« Reply #3 on: May 16, 2010, 05:25:47 AM »
(EE) intel(0): AGP GART support is either not available or cannot be used.
   Make sure your kernel has agpgart support or has
   the agpgart module loaded.

Did you include the graphics-2.6.29.1-tinycore extension in your remaster?

Offline dsara35

  • Newbie
  • *
  • Posts: 49
Re: Xorg Promble in tinycore 2.11
« Reply #4 on: May 17, 2010, 12:32:05 AM »
No..... i just added the tcz that i download from appbrowser i.e wine-gl.tc & thier dependenices.. In that graphics-libs1.tcz is present... Im not add graphics-2.6.9.10.tcz...............
D.Saravanan

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14817
Re: Xorg Promble in tinycore 2.11
« Reply #5 on: May 17, 2010, 12:46:31 AM »
Your Xorg.0.log was showing errors because "agpgart" was missing - this module is in the extension graphics-2.6.29.1-tinycore.tcz

Offline dsara35

  • Newbie
  • *
  • Posts: 49
Re: Xorg Promble in tinycore 2.11
« Reply #6 on: May 17, 2010, 01:38:30 AM »
Ya thanku very much...... Now it working ........ Thanks a lot.................
D.Saravanan

Offline dsara35

  • Newbie
  • *
  • Posts: 49
Re: Xorg Promble in tinycore 2.11
« Reply #7 on: May 17, 2010, 01:40:08 AM »
Other one help i already post the error after creating user there is keymap problem still now i cannt solve that please help me in that too...
D.Saravanan