WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Network on boot  (Read 1864 times)

Offline jjacobs

  • Newbie
  • *
  • Posts: 34
Network on boot
« on: May 12, 2010, 12:58:33 PM »
I have this strange issue.  I have enabled my tinycore linux box to use grub and boot from the hard drive.  All my extensions appear to be loading except the network.  I always have to install firmware-2.6.29.1-tinycore.tcz after boot. Next I become root via su. Finally I run dhcp.sh in the /etc/init.d directory.  Then the network is up.

I originally had to load firmware-2.6.29.1-tinycore.tcz using appbrowser locally from a CD.  I have since copied the frimware extension to my tce/options directory on the hard drive hoping that it would automagically be installed at boot, but I still have to go through the above procedure.

I would very much like the network to be enabled during boot.

Any suggestions?

Offline bmarkus

  • Administrator
  • Hero Member
  • *****
  • Posts: 7183
    • My Community Forum
Re: Network on boot
« Reply #1 on: May 12, 2010, 01:01:58 PM »
Check /tce/onboot.lst file If you just copied over the extension without adding to the list it is not loaded.

Expecting you are using uptodate version.
Béla
Ham Radio callsign: HA5DI

"Amateur Radio: The First Technology-Based Social Network."

Offline jjacobs

  • Newbie
  • *
  • Posts: 34
Re: Network on boot
« Reply #2 on: May 12, 2010, 01:10:03 PM »
Thank you Bmarkus.  That worked! I may very shortly never use another OS!!!

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11049
Re: Network on boot
« Reply #3 on: May 12, 2010, 01:24:48 PM »
You can manage the list of extensions loaded on boot using Appsaudit -> onboot.
The only barriers that can stop you are the ones you create yourself.