WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: inxi  (Read 795 times)

Offline geev03

  • Newbie
  • *
  • Posts: 31
inxi
« on: June 06, 2024, 05:24:54 PM »

http://www.tinycorelinux.net/14.x/armv6/tcz/updates/updatelist.txt

Code: [Select]
tc@box:~$ inxi -v4


System:
  Host: box Kernel: 6.6.28-piCore-v8 arch: aarch64 bits: 64 compiler: gcc
    v: 1.26.0.66
  Desktop: Openbox v: 3.6.1 Distro: piCore 15.0
Machine:
  Type: ARM System: Raspberry Pi 400 Rev 1.0 details: N/A rev: c03130
    serial: 100000005d38c2c9
CPU:
  Info: quad core model: N/A variant: cortex-a72 bits: 64 type: MCP
    arch: ARMv8 rev: 3 cache: L1: 320 KiB L2: 1024 KiB
  Speed (MHz): avg: 600 min/max: 600/1800 cores: 1: 600 2: 600 3: 600 4: 600
    bogomips: 432
  Features: Use -f option to see features
Graphics:
  Device-1: bcm2711-hdmi0 driver: N/A bus-ID: N/A
  Device-2: bcm2711-hdmi1 driver: N/A bus-ID: N/A
  Device-3: bcm2711-vc5 driver: N/A bus-ID: N/A
  Display: server: X.org driver: X: loaded: fbdev unloaded: modesetting
    gpu: N/A resolution: <missing: xdpyinfo/xrandr>
  API: OpenGL Message: Unable to show GL data. glxinfo is missing.
Network:
  Device-1: bcm2835-mmc driver: mmc_bcm2835 v: N/A port: N/A bus-ID: N/A
  Device-2: bcm2711-genet-v5 driver: bcmgenet v: N/A port: N/A bus-ID: N/A
  IF: eth0 state: up speed: 100 Mbps duplex: full mac: dc:a6:32:e0:50:91
Drives:
  Local Storage: total: 14.51 GiB used: 189.7 MiB (1.3%)
  ID-1: /dev/mmcblk0 vendor: Toshiba model: SA16G size: 14.51 GiB
    type: Removable
Partition:
  Message: No partition data found.
Info:
  Memory: total: N/A available: 3.7 GiB used: 918 MiB (24.2%)
  Processes: 131 Uptime: 1h 1m Init: BusyBox
  Packages: 136 Compilers: N/A Shell: ash (busybox) inxi: 3.3.34
tc@box:~$






Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14756
Re: inxi
« Reply #1 on: June 07, 2024, 05:08:38 AM »
Is your question about x?

Have you loaded Xorg-3d and adjusted config.txt?

Offline geev03

  • Newbie
  • *
  • Posts: 31
Re: inxi
« Reply #2 on: June 08, 2024, 12:12:53 PM »
Is your question about x?

Have you loaded Xorg-3d and adjusted config.txt?

Yes, getting a blank screen after loading Xorg-3d in v14.1 . I haven't yet loaded that in V15 and v15 is working well on a rPi400.
I can ssh  tc@ ...  , but cannot get in due to password. Is there a default  password to login ?

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14756
Re: inxi
« Reply #3 on: June 08, 2024, 12:14:56 PM »
piCore

Offline Paul_123

  • Administrator
  • Hero Member
  • *****
  • Posts: 1229
Re: inxi
« Reply #4 on: June 08, 2024, 02:19:37 PM »
With piCore14, if you are trying to use the vc4 display driver, you need to manually create vc4.conf for Xorg.    That is setup automatically in piCore15