Rust i686 assumes SSE2

[easyaspi314]

Tried out tinycore on my old Pentium III and I noticed that the Rust-based librsvg crashes with an illegal instruction. As does rustc itself.

Upon checking the binary, it looks like Rust has been configured to assume SSE2, the default on the rustup i686-linux-gnu target. In order to target earlier processors the entire toolchain must be configured and recompiled manually.

[Juanito]

The trick is getting rust to compile for i486, suggestions welcome..

[patrikg]

I think it's can be done with T2sde.

I follow Rene a lot, and his adventure of his "own" distro.

https://t2sde.org/

[Juanito]

The rust file i686_unknown_linux_gnu.rs contains:

Code: [Select]

use crate::spec::{LinkerFlavor, StackProbeType, Target};

pub fn target() -> Target {
    let mut base = super::linux_gnu_base::opts();
    base.cpu = "pentium4".to_string();
    base.max_atomic_width = Some(64);
    base.pre_link_args.entry(LinkerFlavor::Gcc).or_default().push("-m32".to_string());
    // don't use probe-stack=inline-asm until rust#83139 and rust#84667 are resolved
    base.stack_probes = StackProbeType::Call;

    Target {
        llvm_target: "i686-unknown-linux-gnu".to_string(),
        pointer_width: 32,
        data_layout: "e-m:e-p:32:32-p270:32:32-p271:32:32-p272:64:64-\
            f64:32:64-f80:32-n8:16:32-S128"
            .to_string(),
        arch: "x86".to_string(),
        options: base,
    }
}

..which probably expains why your pentium 3 fails.

If I change pentium4 -> pentium2 and/or i686-unknown-linux-gnu -> i486-unknown-linux-gnu the build fails.

If I use RUSTFLAGS="$RUSTFLAGS -Ctarget-cpu=i486 -Clink-args=-lffi" the build also fails.

llvm/clang was compiled with -march=pentium-m -mtune=i686 as using -march=i484 fails


Edit: -Ctarget-cpu=i586 is building so far..

[Juanito]

rust built with -Ctarget-cpu=i586.

I don't have an i486/i586 to test, maybe you download the rebuilt extension from here and test:

http://tinycorelinux.net/15.x/x86/tcz/src/rust/

[patrikg]

Maybe some one can run it in qemu.

Code: [Select]

qemu-system-i386 -machine pc -cpu 486

Code: [Select]

qemu-system-i386 -machine pc -cpu pentium3

[curaga]

We found before that Qemu is not accurate, it back then allowed new instructions even when told to be a 486.

[easyaspi314]

There was a SIGILL but it was in libllvm-13.so (llvm-lib) which is marked as a Pentium-M only package. So...can't really change that.

Maybe the issue is just librsvg which needs to be recompiled with -C target-cpu=i586. I just don't know if there are any other Rust-based packages in the database that also don't have the rust target flag properly set.

[Juanito]

I recompiled librsvg with  RUSTFLAGS="$RUSTFLAGS -Ctarget-cpu=i586", though it was already compiled with CC="gcc -march=i486 -mtune=i686 -Os -pipe", so I'm not sure it will have made a difference.

You can find the version to test here:

http://tinycorelinux.net/15.x/x86/tcz/src/librsvg/

[linic]

Is the error similar to this?

Code: [Select]

rustc[3007] trap invalid opcode ip:aff76daa sp:bfe0c170 error:0 in libllvm-13.so[aff30000+1a07000]
Illegal instruction
I have a Pentium II so I searched about which flags to use to compile a version of rustc and cargo to match my CPU.
You'll probably need these

Code: [Select]

export CFLAGS="-march=pentium"
export CXXFLAGS="-march=pentium"
export RUST_BACKTRACE=fullYou can look here to see how I use them to compile rust for my Pentium II https://github.com/linic/rust-i586/blob/main/Dockerfile#L15

If it's not enough, maybe you'll need a rust compiler that has been compiled with these flags (and actually more flags than these). I generated a docker image that has a rust compiled this way and which has the various tar.gz files in it. There's one rust-nightly-i586-unknown-linux-gnu.tar.gz which has all the executables (rustc, cargo, etc... + documentation). It's the one I use.
The code to generate the image is here https://github.com/linic/rust-i586/
The images are here https://hub.docker.com/repository/docker/linichotmailca/rust-i586/general
I remember testing the rust 1.75.0 executables from linichotmailca/rust-i586:1.75.0 on my Pentium II (you can docker cp them out of the image) see the usage https://github.com/linic/rust-i586?tab=readme-ov-file#usage. I generated 1.76.0 recently, but I haven't had the time to test it yet on my physical Pentium II. It was generated the same way as 1.75.0 so it should work too probably.

I also have a tcl core image with a rust-1.75.0-i586.tcz ready to use here https://hub.docker.com/repository/docker/linichotmailca/tcl-core-rust-i586/general
The source code to generate that image and the tcz inside of it is here https://github.com/linic/tcl-core-rust-i586. Check the Dockerfile. You can essentially run mostly the same commands (although you'll have to docker cp the resource files from the resource images or compile your own by following what the Dockerfiles for those image do) to generate your own tcz on a real machine.

With the linichotmailca/tcl-core-rust-i586 image, you can docker run it with

Code: [Select]

sudo docker run --name tcl-core-x86-test --interactive <replace-with-your-image-id> /bin/sh (I suggest doing a docker exec -it tcl-core-x86 /bin/sh afterwards in another terminal to get a fully working console you'll see what I mean). Once you have a console, I think you should be able to use that rust version and it should compile programs without the illegal instructions. It's possible to retrieve them from the running container again with docker cp. Maybe you'll still need to set the flags

Code: [Select]

export CFLAGS="-march=pentium"
export CXXFLAGS="-march=pentium"
export RUST_BACKTRACE=full

[mocore]

apparently
We found before that Qemu is not accurate, it back then allowed new instructions even when told to be a 486.

it appears *now* that it might be possible to disable

https://ahelpme.com/software/qemu/qemu-full-virtualization-cpu-emulations-enable-disable-cpu-flags-instruction-sets-of-qemu-8-0/


...ftr apparently
Re: tiny core on 486 : https://forum.tinycorelinux.net/index.php/topic,4908.msg25864.html#msg25864

apparently

Our users found out that the glibc in 2.x includes some 686 code:
http://forum.tinycorelinux.net/index.php?topic=1685.0

Re Qemu, its 486 emulation is not 486-compliant, it allows the 686 code without issue. Bochs is a better test.

[CNK]

I recompiled librsvg with  RUSTFLAGS="$RUSTFLAGS -Ctarget-cpu=i586", though it was already compiled with CC="gcc -march=i486 -mtune=i686 -Os -pipe", so I'm not sure it will have made a difference.

You can find the version to test here:

http://tinycorelinux.net/15.x/x86/tcz/src/librsvg/

Since the OP never replied, I've tried it myself and the rebuild seems to have fixed the issue.

Testing on an Intel Pentium 1 (i586) with TC15, the librsvg.tcz extention in the repo (MD5 checksum 333d2a81982e9c1cdf645fb3effea465) fails with "Illegal instruction" when running the included rsvg-convert program.

The rebuilt extension linked to by Juanito (MD5 checksum 5b2b19489dce26170eb0b0b0d8414a83) runs fine and successfully converted a couple of SVGs I found on Wikipedia.

[Juanito]

librsvg replaced with that from http://tinycorelinux.net/15.x/x86/tcz/src/librsvg/