I install compiletc I can't build c source loss of libisl.so.15

[GAI]

 I  install tiny core in my  rasspberry cm3+  13.03

 I install compiletc   secondly  ,   I build my  code  , it  tall me


error while loading shared libraries : libisl.so.15 :can not open shared object file : no such or directory

[GAI]

what  should i do

[Juanito]

Load the isl and/or isl-dev extensions

[polikuo]

Hi GAI.

Welcome to the forum.

There's a handy command to search for files called provides.sh

To lookup a missing file, simply type

Code: [Select]

provides.sh libisl.so.15

If you check the drop box [Search] of the GUI apps manager.
You'll see [Provides], which yields the same result.

[GAI]

Load the isl and/or isl-dev extensions

this is right  I load the isl

[GAI]

Load the isl and/or isl-dev extensions

this is right  I load the isl

I haven't gui   ,how start gui   

[polikuo]

There should be a meta-extension called TC.tcz for any piCore release.

If you can't find one.

This would do the trick.

Code: [Select]

tce-load -w Xorg flwm_topside wbar aterm
tce-load -i Xorg flwm_topside wbar aterm


[GAI]

There should be a meta-extension called TC.tcz for any piCore release.

If you can't find one.

This would do the trick.

Code: [Select]

tce-load -w Xorg flwm_topside wbar aterm
tce-load -i Xorg flwm_topside wbar aterm


I haven't  internet

[GAI]

There should be a meta-extension called TC.tcz for any piCore release.

If you can't find one.

This would do the trick.

Code: [Select]

tce-load -w Xorg flwm_topside wbar aterm
tce-load -i Xorg flwm_topside wbar aterm


My USB cable network card is rtl8152. How can I drive it

[Juanito]

Which model of RPi are you using (most of them have a built-in network interface)?

[polikuo]

Hi Juanito

Which model of RPi are you using (most of them have a built-in network interface)?

The OP says

I  install tiny core in my  rasspberry cm3+  13.03

That's Compute Module 3+
A cheaper way if you want to build a cluster of Raspberry Pi
I never buy one though

[GAI]

Which model of RPi are you using (most of them have a built-in network interface)?

raspberry Compute Module 3+

[Juanito]

If you search the forums, there are several posts about how to get a usb to network adapter working with an RPi0 - I don't know how relevant this is to an RPi compute module though..

[polikuo]

My USB cable network card is rtl8152. How can I drive it

You'll probably need to build the driver for it.

I've never tried, but I think this page would help.

[Juanito]

Ref: http://tinycorelinux.net/13.x/armv7/releases/RPi/src/kernel/5.10.13-piCore-v7_modules.tar.xz

The following drivers might help:

lib/modules/5.10.13-piCore-v7/kernel/drivers/net/usb/r8152.ko
lib/modules/5.10.13-piCore-v7/kernel/drivers/net/usb/rtl8150.ko