piCore-11beta GUI desktop install

[danny]

Hi Rich,
I tried the command but the same result that web was still blank (reference attach).

[Juanito]

I'm not sure that it is the cause of the problem, but it looks like hardware graphics acceleration is not enabled.

What does this give:

Code: [Select]

$ tce-load -i glxinfo
$ glxinfo | grep Accel

[danny]

It showed:

Code: [Select]

Accelerated: no

[Juanito]

Have you made one of the following entries in /mnt/mmcblk0p1/config.txt:

Code: [Select]

[PI3]
dtoverlay=vc4-kms-v3d

[PI4]                   
dtoverlay=vc4-fkms-v3d

Note that you need to reboot after making the changes.

[danny]

I have made /mnt/mmcblk0p1/config.txt and add dtoverlay=vc4-kms-v3d in it.
After all reboot.
Which the following step I need to do?

[Juanito]

Add the overlay:

Code: [Select]

[PI3]
dtoverlay=vc4-kms-v3d
Reboot

Code: [Select]

$ tce-load -i Xorg-3d flwm aterm wbar
$ sudo rm /usr/local/share/X11/xorg.conf.d/fb*
$ startx


[danny]

Code: [Select]

$ tce-load -i Xorg-3d flwm aterm wbar
$ sudo rm /usr/local/share/X11/xorg.conf.d/fb*
$ startxI have execute that but Web still blank and got message (reference attach).

[danny]

Should I add graphics-4.19.81-piCore-v7.tcz, Xorg-3d.tcz, flwm.tcz to onboot.list?

[Juanito]

For testing purposes there’s no need to do that.

Note that loading Xorg-3d will load graphics-KERNEL anyway.

[danny]

OK
When I enter a web on epiphany, I get

Code: [Select]

GDK_IS_PIXBUF(pixbuf) failed
GDK_IS_CURSOR(cursor) failed
GDK_IS_DISPLAY(display) failed
I think it enter the page successfully but browser cannot display content.

[Juanito]

Does this show the gdk-pixbuf is loaded:

Code: [Select]

$ tce-status -i | grep gdk
If gdk-pixbuf is loaded, then have you checked that you have the latest version with the apps gui maintenance/check for updates?

Note also, from your previous attachment - please paste terminal output rather than attaching a photo - hardware acceleration is not enabled.

Did you copy both lines:

Code: [Select]

[PI3]
dtoverlay=vc4-kms-v3d..to config.txt?

If so, does the screen blank momentarily when graphics-KERNEL is loaded?

[danny]

It shows:

Code: [Select]

gdk-pixbuf
Yes, I have copied

Code: [Select]

[PI3]
dtoverlay=vc4-kms-v3dto config.txt

When I click maintenance/check for updates, it shows

Code: [Select]

Error Could not verify libedit.tcz
Scan for update complete
I don't see the screen blank momentarily when graphics-KERNEL is loaded.

[Juanito]

Which RPi do you have?

[danny]

RPI 3B+

[danny]

I think maybe I have to solve error

Code: [Select]

libEGL warning DRI2: failed to authenticate
Cannot obtain EGL surfaceless configuration: EGL_SUCCESS
Cannot obtain EGL Pbuffer configuration: EGL_SUCCESS
Cannot obtain EGL window context configuration: EGL_SUCCESSat first, right?