Need an Introduction to Tiny Core? Or peruse Core Concepts.
when i install piCore 11.x how can i install wifi ? tce-load -wi wifi error on wifi.tczhow to solve it
$ cat /proc/cpuinfo | grep ModelModel : Raspberry Pi 3 Model B Rev 1.2$ version11.0beta1a$ tce-load -wil firmware-rpi-wireless$ tce-load -wil wireless-KERNEL$ dmesg | tail -15...[ 3737.522708] cfg80211: Loading compiled-in X.509 certificates for regulatory database[ 3737.543585] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'[ 3737.543692] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2[ 3737.543698] cfg80211: failed to load regulatory.db[ 3737.556288] brcmfmac: F1 signature read @0x18000000=0x1541a9a6[ 3737.560204] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1[ 3737.560365] usbcore: registered new interface driver brcmfmac[ 3737.751547] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1[ 3737.751621] brcmfmac: brcmf_c_process_clm_blob: no clm_blob available (err=-2), device may have limited channels available[ 3737.752178] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f$ rfkill list0: phy0: wlan Soft blocked: no Hard blocked: no$ tce-load -wil wifi$ sudo wifi.shSelect Wifi Network ESSID Enc Qual Channel Type 1. juanitonet on 70 8 WPAEnter selection ( 1 - 1 ) or (q)uit: 1Enter password for juanitonet (8 to 63 characters): **********Sending credentials to requested access point juanitonet..deleting routersadding dns 8.8.8.8adding dns 8.8.4.4
$ chmod +x file_name