bootlocal.sh

[bellad]

hi,
i not understand
i put in file bootlocal.sh a script

Code: [Select]

/mnt/mmcblk0p2/scripts/fire.pyafter filetools.sh
i reboot
and no fire.py in ps-e
no start
if try on console

Code: [Select]

sudo /mnt/mmcblk0p2/scripts/fire.pyit's good , start ok

why ?
thank

[bmarkus]

Try

Code: [Select]

/usr/local/bin/python /mnt/mmcblk0p2/scripts/fire.py

[bellad]

thank you Béla , but it's the same with

[bmarkus]

Please share the whole bootlocal.sh

[bellad]

i share monday

[bellad]

hello,
my bootlocal.sh

Code: [Select]

#!/bin/sh
# put other system startup commands here
loadkmap < /usr/share/kmap/azerty/fr.kmap
/mnt/mmcblk0p2/tiny/eth0.sh &
/usr/local/etc/init.d/openssh start
/usr/local/bin/ntpd
ln -fs /usr/local/etc/zoneinfo/Europe/Paris /etc/localtime
cp /mnt/mmcblk0p2/tiny/gammurc /etc
cp /mnt/mmcblk0p2/tiny/gammu-smsdrc /etc
/usr/local/bin/gammu-smsd
wait 5
/usr/local/bin/python /mnt/mmcblk0p2/scripts/fire.py &
/usr/local/bin/python /mnt/mmcblk0p2/scripts/dossier.py &



[Rich]

Hi bellad
If  fire.py  depends on networking, your network may not yet be up. Try removing the  &  from  /mnt/mmcblk0p2/tiny/eth0.sh
and see what happens.

[curaga]

Also, "wait 5" doesn't make sense.

[bellad]

ok , i found ,
i put

Code: [Select]

/usr/local/bin/gammu-smsd after the py scripts

[bellad]

other , where is vcgencmd ??
thank

[kabera]

instead of Wait 5 you need to put sleep 5

[kabera]

here is my bootlocal.sh

Code: [Select]

#!/bin/sh

# Start serial terminal
/usr/sbin/startserialtty &

# Set CPU frequency governor to ondemand (default is performance)
echo ondemand > /sys/devices/system/cpu/cpu0/cpufreq/scaling_governor

# Load modules
/sbin/modprobe i2c-dev

# Start openssh daemon
/usr/local/etc/init.d/openssh start

# ------ Put other system startup commands below this line
/bin/mount -t ext4 -o noatime /dev/sda1 /mnt/sda1
/bin/sleep 3
/bin/cp /mnt/sda1/etc/smb.conf /usr/local/etc/samba/
/bin/sleep 1
/usr/local/bin/smbpasswd -Lan nobody
#/usr/local/sbin/smbd --configfile=/mnt/sda1/etc/smb.conf 
/usr/local/sbin/smbd