piCore 6.0 Beta100

[sbp]

Hi Belá

The patched version is working better (still not as good as before). I can now connect to one of my access points however I can't connect to the other one.

This is the one I can connect to:

Code: [Select]

Select Wifi Network

    ESSID                         Enc   Qual    Channel Type
 1. linksys                        on    70       6     WPA
 2. Steens 2.4GHz                  on    26       6     WPA
 

Enter selection ( 1 - 3 ) or (q)uit: 1
Enter password for linksys (8 to 63 characters): smiley
Enter password for linksys (8 to 63 characters): smiley12
Sending credentials to requested access point linksys..
udhcpc (v1.22.1) started
Sending discover...
Sending select for 192.168.1.25...
Lease of 192.168.1.25 obtained, lease time 604800
deleting routers
adding dns 193.162.153.164
adding dns 194.239.134.83
tc@box:~$


However, this network it can't connect to:

Code: [Select]

Select Wifi Network

    ESSID                         Enc   Qual    Channel Type
 1. linksys                        on    70       6     WPA
 2.                                on    42       1     WPA
 3. Steens 2.4GHz                  on    30       6     WPA

Enter selection ( 1 - 3 ) or (q)uit: 3
Enter password for Steens 2.4GHz (8 to 63 characters): smiley12
Sending credentials to requested access point Steens 2.4GHz..
udhcpc (v1.22.1) started
Sending discover...
Sending discover...
Sending discover...
No lease, failing
Failed to connect.
tc@box:~$

Regards
Steen

[bmarkus]

Hi Steen

thanks for testing. I will make a new version with disabled powersaving.

Regards... Béla

[sbp]

Hi Belá

Just tested previous piCore6.0 version 3.17.4.
In this version I can connect to both my wifi access points with the realtek wifi (Edimax). So something is different with the 3.18.0 kernel and modules.

Steen