WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki
« previous next »
Pages: [1]   Go Down

Author Topic: [SOLVED] microcore with intel amt  (Read 6662 times)

Offline tinyme

  • Newbie
  • *
  • Posts: 23
[SOLVED] microcore with intel amt
« on: January 23, 2013, 02:38:15 AM »
Did someone on this forum manage to boot microcore with intel amt?
Executing ifconfig showed that the same ip address as the one of intel amt was used (192.168.1.103). However, it was impossible to connect to port 16992 and 16994.
A soft reboot (reset) didn't resolve the issue. Manually turning the machine off (power button) and on again restored connectivity.
« Last Edit: March 08, 2013, 03:39:21 AM by tinyme »
Logged

Offline tinyme

  • Newbie
  • *
  • Posts: 23
Re: microcore with intel amt
« Reply #1 on: January 23, 2013, 12:57:44 PM »
Logged

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11050
Re: microcore with intel amt
« Reply #2 on: January 23, 2013, 01:29:34 PM »
Yes, it is included.
Logged
The only barriers that can stop you are the ones you create yourself.

Offline tinyme

  • Newbie
  • *
  • Posts: 23
Re: microcore with intel amt
« Reply #3 on: January 24, 2013, 10:51:05 AM »
Do you know then why the system has to be manually rebooted after the startup of microcore? The reset doesn't work anymore via commands.
Logged

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14851
Re: microcore with intel amt
« Reply #4 on: January 24, 2013, 11:00:43 AM »
which commands are you trying to use - does "sudo exitcheck.sh reboot" work?
Logged

Offline tinyme

  • Newbie
  • *
  • Posts: 23
Re: microcore with intel amt
« Reply #5 on: January 24, 2013, 12:02:36 PM »
I use intel amt to give a reset (doesn't work) We can only give a reset with the reset button (on the case) I will try the reset mentioned above.
Logged

Offline tinyme

  • Newbie
  • *
  • Posts: 23
Re: microcore with intel amt
« Reply #6 on: January 24, 2013, 12:16:29 PM »
Reset above doesn't work, I loose the connection completely so I can't give in any commands (after booting)
Logged

Offline tinyme

  • Newbie
  • *
  • Posts: 23
Re: microcore with intel amt
« Reply #7 on: January 24, 2013, 12:23:26 PM »
When I reboot with the above command (on the keyboard of the amtsystem) the computer reboots but port 16992 stays occupied.
Logged

Offline tinyme

  • Newbie
  • *
  • Posts: 23
Re: microcore with intel amt
« Reply #8 on: February 20, 2013, 12:15:34 PM »
This topic is resolved, the problem wasn't due to microcore but due to the intel code for linux (to use ider)
Logged
Pages: [1]   Go Up
« previous next »