WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: (solved) mc4.1+ xorg74 refuse to put files on-demand (in appsaudit)  (Read 4951 times)

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
example:
- I open the Appsaudit
- I open the ondemand menue
- I choose "minefield"..
then the window of Appsaudit close automatically.
It happens in tcl and mc with xorg76, too.

So, I should now (workaround):
- delete the tcz I wanted in ondemand
- reboot
- approwser this tcz with load "ondemand".
This way of putting an extension as ondemand is a bit longer as usual.
« Last Edit: December 20, 2011, 01:27:47 PM by floppy »
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11044
Re: mc4.1+ xorg74 refuse to put files on-demand (in appsaudit)
« Reply #1 on: December 05, 2011, 10:15:20 AM »
If you start appsaudit from a terminal, any messages? Anything in dmesg?
The only barriers that can stop you are the ones you create yourself.

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: mc4.1+ xorg74 refuse to put files on-demand (in appsaudit)
« Reply #2 on: December 06, 2011, 03:58:52 PM »
Desktop AMD K6-III 550MHz (see signature):
- mc4_1 and Xorg74 (all new updated Xlibs etc.)
- appsaudit started in a terminal
- try to put an extension on boot or on demand..
the windows close with the error message in the terminal "Illegal instruction".
Nothing in dmesg.

I will try mc4_1 and Xorg76 and tcl4_1 on that pc and post here any news.

Update: same error with all tries above "Illegal instruction".
« Last Edit: December 06, 2011, 04:20:23 PM by floppy »
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: mc4.1+ xorg74 refuse to put files on-demand (in appsaudit)
« Reply #3 on: December 11, 2011, 10:29:44 AM »
since, there is no solution in sight for this issue, what is the command-line
a) for putting loaded extensions as "on demand" for next start?
b) for putting extensions as "on boot"? (loaded or not)... Other method than editing the onboot.lst
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: mc4.1+ xorg74 refuse to put files on-demand (in appsaudit)
« Reply #4 on: December 11, 2011, 10:47:00 AM »
Its the hardware.  AMD K6. You can try 4.2 as compile time options were adjusted to try to support older gear.
4.2 was tested on 586 but no one on team has AMD K6
10+ Years Contributing to Linux Open Source Projects.

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: mc4.1+ xorg74 refuse to put files on-demand (in appsaudit)
« Reply #5 on: December 13, 2011, 03:45:11 PM »
since, there is no solution in sight for this issue, what is the command-line
a) for putting loaded extensions as "on demand" for next start?
b) for putting extensions as "on boot"? (loaded or not)... Other method than editing the onboot.lst
Thanks Roberts for the motivating words.. but an answer for the questions above would be helpfull (as long I dont start screwing my old pc with the 4_2..)
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline roberts

  • Retired Admins
  • Hero Member
  • *****
  • Posts: 7361
  • Founder Emeritus
Re: mc4.1+ xorg74 refuse to put files on-demand (in appsaudit)
« Reply #6 on: December 13, 2011, 05:53:59 PM »
If you won't try booting CorePlus-4.2 then not much I can do. I can't make a K6 into a 686 or even a 586.
10+ Years Contributing to Linux Open Source Projects.

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: mc4.1+ xorg74 refuse to put files on-demand (in appsaudit)
« Reply #7 on: December 20, 2011, 01:27:19 PM »
It is solved with V 4.2rc2 (Xorg7.4 or 7.6).
Thanks a lot.
TC 4.2 is a fine operating system.
I will freeze my AMD K6-III with the released version of 4.2.
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed