WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: cups1311 - "print empty file" - dep to poppler-bin  (Read 2412 times)

Offline netnomad

  • Hero Member
  • *****
  • Posts: 1026
cups1311 - "print empty file" - dep to poppler-bin
« on: August 06, 2011, 10:21:19 AM »
in some situations or better some programs have the problem with cups1311,
that the error message "print empty file" appears and
the print job doesn't work.

this problem was already reported one year ago in this thread
http://forum.tinycorelinux.net/index.php?topic=6962.0

it could be solved with the additonal dep of "poppler-bin".

would you please add poppler-bin to the dep-file of cups1311 or
do you suggest another way to solve this problem?


« Last Edit: August 06, 2011, 10:23:12 AM by netnomad »

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11522
Re: cups1311 - "print empty file" - dep to poppler-bin
« Reply #1 on: August 06, 2011, 12:17:02 PM »
Hi netnomad
You could PM the extension maintainer and bring it to their attention. In the mean time you could install
poppler to fix your problem.

Offline netnomad

  • Hero Member
  • *****
  • Posts: 1026
Re: cups1311 - "print empty file" - dep to poppler-bin
« Reply #2 on: September 10, 2011, 11:57:40 AM »
hi perthie,

the dep-file is still not corrected.

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: cups1311 - "print empty file" - dep to poppler-bin
« Reply #3 on: September 10, 2011, 04:04:48 PM »
in some situations or better some programs have the problem with cups1311,
that the error message "print empty file" appears and
the print job doesn't work.
I have a similar issue?. See http://forum.tinycorelinux.net/index.php/topic,11305.0.html
I will continue searching a solution.
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline netnomad

  • Hero Member
  • *****
  • Posts: 1026
Re: cups1311 - "print empty file" - dep to poppler-bin
« Reply #4 on: September 11, 2011, 04:38:22 AM »
this problem occurs only with certain programs on cups 1311:
f.e. i install or tce-load gimp2 and eog at the same time.
the same jpg is printed as a empty page in gimp2
and with eog it's printed fine.
both programs are loaded, so both programs can use all loaded deps.