WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Joystick setup; howto? (usb 12bd:a02f)  (Read 908 times)

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Joystick setup; howto? (usb 12bd:a02f)
« on: March 25, 2012, 05:39:41 AM »
hello,
"starfighter" in TCL is nice with the keyboard but I would like to use an usb joystick.
So, I loaded the extension input-joystick. But there is no reaction at all (core 4.3.1).
Im sticking in my current project how to install the joystick... and further searching how to do it.
Any advice is welcome.

edit: here is the joystick http://www.trust.com/products/product.aspx?artnr=14274
« Last Edit: March 26, 2012, 07:09:34 AM by floppy »
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline Rich

  • TinyCore Moderator
  • Hero Member
  • *****
  • Posts: 4249
Re: Joystick setup; howto? (usb 12bd:a02f)
« Reply #1 on: March 25, 2012, 06:19:55 AM »
Hi floppy
Have you tried unplugging and replugging it to see if it gets detected that way?

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: Joystick setup; howto? (usb 12bd:a02f)
« Reply #2 on: March 25, 2012, 08:23:22 AM »
Hi floppy
Have you tried unplugging and replugging it to see if it gets detected that way?
according dmesg, it is recognized at boot and with unplug/plug.
I just can use the keyboard (keys "space" "up" "down" "left"..) but no reaction with the joystick.
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline AbNoRMiS

  • Hero Member
  • *****
  • Posts: 551
  • nothing can be impeccable in this imperfect world
    • @ß№®M!$
Re: Joystick setup; howto? (usb 12bd:a02f)
« Reply #3 on: March 25, 2012, 10:15:41 AM »
i found joystick configure manual for starfighter here
maybe this instructions will help?
Basic Design Concept © @ß№®M!$
please forgive my terrible english :)