Tiny Core Linux
Tiny Core Base => TCB Talk => Topic started by: rcacheira on June 07, 2011, 11:01:16 AM
-
Hi ppl,
I'm trying to install a touchscreen on tiny core 3.0, but when i run th sh config file i've the following output:
(E) No X configuration file found.
i've tried to install xorg 7.5, and graphics2.6.33.3, but the output is the same.
Anyone have any sugestion?
-
You can create one if you need it, see the info file.
-
I've tried Xorg -configure
But when launch x -config "/home/tc/xorg.conf.new"
X doesnt start
And i've tried too with xorg.conf.vesa and x doesn't start again and show me a white line blinking at top left corner o the screen!
output of Xorg - configure
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/box:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33.3-tinycore i686
Current Operating System: Linux box 2.6.33.3-tinycore #2012 SMP Wed May 12 17:05:42 EEST 2010 i686
Kernel command line: BOOT_IMAGE=/boot/bzImage quiet home=hdc1 showapps kmap=pt-latin1 tz=WET+1WEST,M3.5.0/1,M10.5.5/2
Build Date: 28 May 2010 06:50:29PM
Current version of pixman: 0.20.2
Before reporting problems, check www.tinycorelinux.com
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 7 16:47:46 2011
List of video drivers:
ztv
voodoo
via
apm
v4l
unichrome
tseng
trident
tga
tdfx
sisusb
sis
siliconmotion
savage
s3virge
s3
rendition
radeon
r128
openchrome
nv
neomagic
mga
mach64
intel
i740
i128
glint
geode
ark
dummy
cirrus
chips
ati
ast
fbdev
vesa
(EE) Failed to load module "via" (no error, 0)
(EE) Failed to load module "openchrome" (no error, 0)
(++) Using config file: "/home/tc/xorg.conf.new"
Xorg detected your mouse at device /dev/input/mice.
Please check your config if the mouse is still not
operational, as by default Xorg tries to autodetect
the protocol.
Your xorg.conf file is /home/tc/xorg.conf.new
To test the server, run 'X -config /home/tc/xorg.conf.new'
output of X -config /home/tc/xorg.conf.new
_XSERVTransSocketOpenCOTSServer: Unable to open socket for inet6
_XSERVTransOpen: transport open failed for inet6/box:0
_XSERVTransMakeAllCOTSServerListeners: failed to open listener for inet6
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.33.3-tinycore i686
Current Operating System: Linux box 2.6.33.3-tinycore #2012 SMP Wed May 12 17:05:42 EEST 2010 i686
Kernel command line: BOOT_IMAGE=/boot/bzImage quiet home=hdc1 showapps kmap=pt-latin1 tz=WET+1WEST,M3.5.0/1,M10.5.5/2
Build Date: 28 May 2010 06:50:29PM
Current version of pixman: 0.20.2
Before reporting problems, check www.tinycorelinux.com
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Tue Jun 7 16:49:20 2011
(++) Using config file: "/home/tc/xorg.conf.new"
(EE) UNICHROME(0): Unknown Card-Ids ( 908|1975), report this to unichrome-devel@lists.sf.net ASAP
-
A Via chip that's not supported? What's your touchscreen, perhaps you can get it to work with xvesa (I'm assuming Xvesa works fine for you).
-
yes xvesa works fine for me but i cant instal eGalaxyTouch(touch driver) with xvesa, because driver require x config file that isn't found.
-
I tried to get an eGalax touch screen going with TC also a while ago and I gave up without getting it going.
I would also be very interested in the solution.
Peter.
-
There are several related threads in this forum - not to say the subject has been discussed to death in every aspect...
-
you could try the xvtouch extension, which works with Xvesa