Tiny Core Linux

Tiny Core Extensions => TCE Q&A Forum => Topic started by: Abdullah on April 19, 2011, 12:32:27 PM

Title: graphics-2.6.33.3-tinycore
Post by: Abdullah on April 19, 2011, 12:32:27 PM
when i install this package the screen imediatly flicker is this a bug or some configration problem
Title: Re: graphics-2.6.33.3-tinycore
Post by: Juanito on April 19, 2011, 01:11:07 PM
This is due to the graphics mode changing
Title: Re: graphics-2.6.33.3-tinycore
Post by: Abdullah on April 19, 2011, 03:00:00 PM
could you please tell me how to fix it
Title: Re: graphics-2.6.33.3-tinycore
Post by: Juanito on April 19, 2011, 11:37:56 PM
If you're using intel hardware, you can add "options i915 modeset=0" to /etc/modprobe.conf.

You could also search these forums on "ums kms" to see if another method is turned up.
Title: Re: graphics-2.6.33.3-tinycore
Post by: bmarkus on April 20, 2011, 03:01:44 AM
You may try the nomodeset boot option.
Title: Re: graphics-2.6.33.3-tinycore
Post by: Abdullah on April 20, 2011, 04:06:24 AM
Quote from: Juanito on April 19, 2011, 11:37:56 PM
If you're using intel hardware, you can add "options i915 modeset=0" to /etc/modprobe.conf.

You could also search these forums on "ums kms" to see if another method is turned up.

i test it put it dos not work also i test modest=1 on the booting the system give's me intel_rng= FWH note detected is this related to this problem also the either net it give's me up down on the booting
Title: Re: graphics-2.6.33.3-tinycore
Post by: Juanito on April 20, 2011, 04:58:26 AM
Quote from: bmarkus on April 20, 2011, 03:01:44 AM
You may try the nomodeset boot option.

Did you try this?

What graphics hardware are you using?
Title: Re: graphics-2.6.33.3-tinycore
Post by: Abdullah on April 20, 2011, 09:43:45 AM
inlet graphics chipset 915 family 85525 we have one one card with 2 output LVDS and VGA
Title: Re: graphics-2.6.33.3-tinycore
Post by: Juanito on April 20, 2011, 10:06:14 AM
I have similar hardware (i945) which works fine with Xorg-7.5.

If it helps, here's the relevant sections of the xorg.conf I use:
Code: [Select]
Section "Monitor"
Identifier   "VGA"
EndSection

Section "Monitor"
Identifier   "LCD"
DisplaySize 260 162
EndSection

Section "Device"
Identifier  "Card0"
Driver      "intel"
VendorName  "Intel Corporation"
BoardName   "Integrated Graphics Chipset: Intel(R) 945GM"
BusID       "PCI:0:2:0"
Option "Monitor-LVDS1" "LCD"
Option "Monitor-VGA1" "VGA"
EndSection

Section "Screen"
Identifier "Screen0"
Device     "Card0"
Monitor    "LCD"
SubSection "Display"
# Viewport   0 0
Depth     24
Modes     "1280x800"
EndSubSection
EndSection
Title: Re: graphics-2.6.33.3-tinycore
Post by: Abdullah on April 20, 2011, 07:01:47 PM
i will try the configuration ; however the when i install the graphics-2.6 **-tinycore
the screen flickering even if i don not start the Xorg
Title: Re: graphics-2.6.33.3-tinycore
Post by: Abdullah on April 23, 2011, 03:48:47 PM
 i trry the configuration but it dos not work ???
is the Xorg server work on tinycore or not? i do every things but when i install it noting work also the graphics * tinycore it dos not work.
can this happens because of boot option problem or other things ?
Title: Re: graphics-2.6.33.3-tinycore
Post by: Rich on April 23, 2011, 03:59:25 PM
Hi Abdullah
Is it possible your monitor can not support the scan frequency and or resolution you are trying to use?
Title: Re: graphics-2.6.33.3-tinycore
Post by: Abdullah on April 25, 2011, 04:05:34 AM
no my friend i test it on deferent  monitors