Tiny Core Linux
Tiny Core Extensions => TCE Q&A Forum => Topic started by: trembb22 on September 04, 2009, 02:10:45 PM
-
I did install all alsa tce, did alsactl store and alsasound start give me:
Unknown hardware: "HDA-Intel" "Realtek ALC662 rev1" "HDA:10ec0662,8086d603,00100101" "0x8086" "0xd603"
Hardware is initialized using a guess method
/usr/local/share/alsa/init/default:51: control element not found
/usr/local/share/alsa/init/default:52: missing closing brace for format
/usr/local/share/alsa/init/default:52: error parsing CTL attribute
/usr/local/share/alsa/init/default:52: invalid rule
where should I start to fix this issue, maybe I need to build a new module but how
thanks
-
I tryied anyway alsamixer and used it to increase sound level at 100% everywhere.
than: speaker-test -Dplug=front -c2
produced noise sound on my left front speaker, that speaker-test switch to the right front speaker and there is no sound out of the front right speaker, only a click at beggining of the switch from left to right.
any idea?
it seems that my sound hardware work with alsa even if I got some stranges errors messages.
thanks for your help
-
now, how do we make alsamixer settings persistant accross boot?
thanks for your help on that one too.
-
found it!
set everything under: alsamixer
than
save setting into /etc/asound.state when executing: alsactl store
than
backup /etc/asound.state by adding it into the file .filetool.lst
than
it's done, setting are back the same after a reboot but dont forget to backup at shutdown
BUT I STILL HAVE NO SOUND ON THE FRONT RIGHT SPEAKER!!!
-
finnally I have a broken speaker, the right speaker is dead, so my problem wasn't a software problem.
this is closing the subject
thank you anyway