Tiny Core Linux
Off-Topic => Off-Topic - Tiny Core Lounge => Topic started by: Richard Cranium on June 10, 2026, 02:18:22 PM
-
I modded my xbox 360 a few months ago using abadavatarhdd and the package I downloaded was already setup with Aurora and the required plugins and such.. It"s kind of a pain in the you-know-what to get this all done . it went smoothly enough , just time consuming..
Anyway , I've loaded around 45 games into it (that i own ::) ;D ) ,everything on my 360 has worked great since , , until last week.. that is ... I'm really not sure what happened , I tried to rip my copy of Gears of War 3 to the hard drive and it failed , i tried again and it failed again , so i gave up on that one .., but here's the weird part - afterward i noticed a new entry on the dash , it was the 0000000000000000 folder and then......... games ... started ... disappearing !!! until none of them showed up but a few homebrew apps from a different directory and that darn zeros folder..
I've tried completely re-installing Aurora and guess what??? the zeros folder came back when I scan my games.... no games show up...
What did I do to screw it up?????
I'm seriously p1$$3d !!!!
-
These are some excerpts from Googles Bot (Gemini)
If re-adding the path didn't change anything and that 16-zero folder is still sitting on your dash, it means Aurora is persistently recognizing the folder itself as a homebrew application or a broken game container.
Let's look at how to manually get rid of it and force Aurora to see the actual games inside.
1. Hide or Delete the "0000000000000000" Icon
Since Aurora has cached that specific folder as a game, you need to remove it from the grid:
Highlight the 0000000000000000 folder icon on your main dashboard.
Press Y to open the game options.
Look for Hide or Delete.
Note: Choose Hide if you want it off your dash safely. If you choose Delete, make sure the prompt says "Delete from Database Only" and NOT "Delete from Hard Drive," otherwise it will wipe your actual game files.
2. Verify Your Files via File Manager
Let's make sure the games aren't corrupted or in a format Aurora can't read.
Go to the Aurora File Manager.
Navigate to Hdd1:\Content\0000000000000000\.
Open one of your game folders (e.g., 41560817).
You should see a folder named 00007000. Open that.
Inside, you should see a file that matches the folder name (like 41560817... with no file extension) along with a smaller folder.
If you open these folders in File Manager and they are completely empty, or if they just contain .iso files, Aurora won't scan them. Xbox 360 games must be in GOD (Games on Demand) format or XEX (extracted) format to show up.
3. The "Games" Folder Alternative (If GOD format is broken)
If Aurora refuses to read the Content\0000000000000000 folder properly due to a bug in the database, a reliable workaround is to move a game outside of that directory to test it:
In the File Manager, go to Hdd1:\ and press X to create a new folder named Games.
Go to Hdd1:\Content\0000000000000000\, highlight one of your game folders (the 8-character code), and press X to cut it.
Go to your new Hdd1:\Games\ folder and paste it there.
Go back to Manage Paths, delete your old path, and add a new path pointing directly to Hdd1:\Games\ with a scan depth of 3.
If this test game shows up on your dashboard, it confirms that your original Content folder structure has an issue or Aurora's database has pinned a glitch on that specific directory.
if i put all my games into a "Games" folder , then iso2god on windows won't put games there.
That is completely correct. Iso2God is hardcoded to automatically output games into that specific Content\0000000000000000\ structure because that is how the official Xbox 360 dashboard expects to find them.
Since Iso2God won't let you change that default structure, here is how you can set up Aurora so you can keep using Iso2God without breaking your dashboard:
The Solution: Keep the Files There, But Change Aurora's Target
You don't actually need to move the games out of that folder permanently. We just need to force Aurora to look past the 0000000000000000 folder so it stops treating the folder itself as a game.
Go to Settings → Content → Manage Paths and delete any paths you currently have listed.
Select Add, then click Change Path.
Navigate to Hdd1:\Content\.
Highlight the 0000000000000000 folder and press A to go inside it.
Once you are inside the folder (where you see all the individual game Title IDs like 41560817), press Y to select this exact location.
Set the Scan Depth to 2.
Press X to save.
Why This Fixes It
By selecting the inside of the folder and setting the scan depth to 2, Aurora starts its search below the 16-zero folder. It will only look at the Title ID folders (Depth 1) and the data folders inside them (Depth 2). It completely bypasses the 0000000000000000 folder itself, preventing it from appearing as a blank icon on your dash.
One Last Check: Is Nova Connected?
If the paths are exactly like the steps above and games still don't appear, Aurora might be waiting for title notes/covers before displaying them.
Press Back on your controller to see if Aurora is successfully connected to the internet (it will show an IP address at the bottom).
If you aren't connected to the internet, press Y on that blank folder icon if it's still there, and check if the game is actually listed under a weird title or missing its artwork entirely.
If Aurora completely refuses to see the individual title folders inside 0000000000000000 even when you target it directly, the issue isn't the scan path anymore. Aurora is running into a deeper issue—either a corrupted database lock, a broken folder layout from the conversion, or a hardware partition bug.
Let's bypass the path settings entirely and check these three critical areas to pinpoint exactly why it's blind to those folders.
1. Test If the Games Actually Work (The File Manager Test)
We need to know if Aurora can physically execute the game data or if the files themselves are broken.
Go to Aurora's File Manager.
Navigate deep into one game: Hdd1:\Content\0000000000000000\ [Your Game Title ID Folder] \ 00007000 \
Look at the data files inside. For Iso2God files, you should see one file that matches the Title ID name exactly (with no file extension) and a companion folder ending in .data.
The Test: Select that nameless file and press A to try to launch it.
If the game launches: The files are perfectly fine. Aurora's scanning database is heavily corrupted or glitched, keeping it from cataloging them. Go to Step 2.
If it says "Failed to launch" or the folder is totally empty: Something went wrong during the Iso2God conversion or transfer. The Xbox can't read the files, so Aurora ignores them during a scan. You will need to re-convert a game on your PC and transfer it over again.
2. Nuking the Corrupted Aurora Database
Since you mentioned this is a fresh install, if it glitched on its very first scan, it may have written a corrupted database file (aurora.db). Once this file corrupts, Aurora will completely ignore any new paths or scan commands you throw at it.
To wipe it and force a hard reset:
Open the File Manager and navigate to your main Aurora installation folder (usually Hdd1:\Aurora\).
Open the Data folder.
Look for a folder named Databases.
Inside, highlight aurora.db and delete it.
Restart your Xbox. Aurora will automatically generate a brand-new, completely clean database file on boot. Now, try setting your path inside the 16-zero folder with a depth of 2 again.
3. Check for the 32GB Partition Glitch
If you recently formatted or changed your internal hard drive, check the official Xbox stock dashboard.
Go to stock settings → Storage. Does your hard drive show its full size (e.g., 250GB, 500GB), or does it say something small like 32GB?
If the official stock dash only recognizes a tiny 32GB partition of your drive, it will lock down the Hdd1:\Content\0000000000000000 directory. Aurora won't be allowed to read anything inside it because the system thinks that area of the drive doesn't exist. If this is the case, the hard drive partition table needs to be rebuilt using a tool like FATXplorer on a PC.
and if all that still doesn't work???
If deleting the database and fixing the paths still leaves you with a blank dashboard, Aurora is experiencing a deeper system conflict—likely an issue with its installation files, a glitching plugin, or a corrupted launch.ini file preventing background scripts from executing the scan.
Since the standard fixes aren't taking hold, here are the final advanced steps to completely resolve it:
1. Perform a True "Clean" Aurora Installation
Simply overwriting old folders can leave behind corrupted cache files or hidden configuration settings that break the scanner.
Boot into the stock Xbox dashboard or use XEXMenu.
Navigate to your hard drive (Hdd1:\) and completely delete the entire Aurora folder. (Don't worry, your games are safe in the Content folder).
Download a fresh copy of the latest Aurora setup zip on your computer.
Extract it and transfer the brand-new Aurora folder back to your Xbox hard drive.
Launch the fresh Aurora.xex. Setting up the content path on a completely untouched installation usually forces the scanner to behave.
2. Check for DashLaunch Plugin Conflicts
Sometimes background plugins (like outdated stealth servers, cheat engines, or custom system links) intercept Aurora's operations and freeze the scanning module.
Launch DashLaunch on your Xbox.
Go to the Plugins section.
Note down any plugins currently set to load on boot, then clear them out so that no external plugins are running.
Press RB to go to the "Save/Load" menu, highlight your primary storage device (Hdd1), and press X to save the changes to your launch.ini.
Restart the console and see if Aurora successfully scans without those background tasks running.
3. Use the Standard "Games" Folder Workaround (Without breaking Iso2God)
If Aurora absolutely refuses to scan the Content\0000000000000000 folder due to an unfixable system bug, you can bypass the issue entirely while still using Iso2God on your PC:
Create a folder named Games directly on the root of your hard drive (Hdd1:\Games\).
Point your Aurora content path directly to Hdd1:\Games\ with a scan depth of 3.
Your New Workflow: Keep using Iso2God on your PC exactly as you always do. When it finishes converting a game, it will output a folder named with 8 letters/numbers (the Title ID).
Instead of transferring that folder into the 16-zeros folder, simply drag and drop that Title ID folder directly into your new Hdd1:\Games\ directory.
Because Aurora is scanning a clean, custom folder instead of the crowded system folder, it will instantly register your games without getting tripped up by Xbox system files.
i copied the launch.ini file from the hard drive and i'm viewing it on my computer , i don't see anything wrong with it, as far as i can tell.
Since the text in the file looks clean to the naked eye, the problem likely isn't a glaring mistake or a broken line. Instead, it usually comes down to hidden formatting issues or background plugins that look normal but are causing a conflict.
Here is what to look out for while you have it open on your computer:
1. The Text Encoding Bug (The most common invisible issue)
When an Xbox 360 reads a launch.ini file, it is incredibly picky about how the file was saved. If it was edited or saved on a PC using standard UTF-8 or UTF-8 with BOM encoding, the Xbox kernel often fails to read it properly.
To it fix it, open the file in Notepad, go to File > Save As, and look at the Encoding dropdown at the bottom.
Change it to ANSI (or 1200 / UTF-16 LE depending on your text editor) and hit save.
2. Check the [Plugins] Section
Look closely at the lines under the [Plugins] header. Do you see any paths pointing to .xex files? (For example: plugin1 = Hdd:\plugins\something.xex).
If you see any plugins listed there, they will load into the console's RAM instantly on boot. Even if the text looks perfectly correct, that specific plugin might be outdated or incompatible with your current Aurora build, causing the scanner to lock up.
The Test: Put a semicolon ; in front of any plugin line (e.g., ;plugin1 = Hdd:\...). The semicolon tells the system to ignore that line. Save it, put it back on the Xbox, and see if Aurora scans.
3. Check the [Settings] Block
Make sure these fundamental settings aren't conflicting:
pingpatch = true (Should be true for homebrew network features)
contpatch = true (Crucial for Content folder scanning)
livestrong = false (If this is set to true, it blocks Aurora from connecting to various asset servers, which can stall the scanning thread indefinitely if it's waiting on a response).
The Fast Track Solution
If you want to completely rule out launch.ini without guessing, simply rename the file on your hard drive to launch.bak (which disables it entirely) and restart the Xbox. The console will boot using absolute system defaults with no plugins running. If Aurora suddenly starts scanning your games, you know for certain that something inside that file was the bottleneck.