Tiny Core Linux
Tiny Core Extensions => TCE Talk => Extension requests => Topic started by: xor on May 25, 2024, 10:25:23 AM
-
How to compile Astrolog 7.7 on Tiny Core Linux (for TCL-11.1 ; x86 & x86_64-bit)
https://sourceforge.net/projects/astrology/files/astrolog/
-
Why not try dong it your self, like I said the thread before.
-
As a starting point, download the source tarball, uncompress it and check whether it uses autotools, cmake, meson or something else as a build system.
-
I asked for your help because I don't know how to compile a file whose source code is not even 5MB.
I don't want you to provide me with a ready-compiled version, I want to compile it myself.
-
Hi xor
tc@E310:~$ mkdir astroDownload ast77src.zip into the astro directory you just created.
tc@E310:~$ cd astro/
tc@E310:~/astro$ unzip ast77src.zip
tc@E310:~/astro$ tce-load -wil compiletc Xorg-7.7-dev
tc@E310:~/astro$ make
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o astrolog.o astrolog.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o atlas.o atlas.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o calc.o calc.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o charts0.o charts0.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o charts1.o charts1.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o charts2.o charts2.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o charts3.o charts3.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o data.o data.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o express.o express.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o general.o general.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o intrpret.o intrpret.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o io.o io.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o matrix.o matrix.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o placalc.o placalc.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o placalc2.o placalc2.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o xdata.o xdata.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o xgeneral.o xgeneral.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o xdevice.o xdevice.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o xcharts0.o xcharts0.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o xcharts1.o xcharts1.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o xcharts2.o xcharts2.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o xscreen.o xscreen.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o swecl.o swecl.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o swedate.o swedate.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o swehouse.o swehouse.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o swejpl.o swejpl.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o swemmoon.o swemmoon.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o swemplan.o swemplan.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o sweph.o sweph.cpp
g++ -O -Wno-write-strings -Wno-narrowing -Wno-comment -c -o swephlib.o swephlib.cpp
cc -o astrolog astrolog.o atlas.o calc.o charts0.o charts1.o charts2.o charts3.o data.o express.o general.o intrpret.o io.o matrix.o placalc.o placalc2.o xdata.o xgeneral.o xdevice.o xcharts0.o xcharts1.o xcharts2.o xscreen.o swecl.o swedate.o swehouse.o swejpl.o swemmoon.o swemplan.o sweph.o swephlib.o -lm -lX11 -ldl -s
tc@E310:~/astro$ ./astrolog
If you enter:
tc@E310:~/astro$ ./astrolog -Hit will list about 270 command line switches.
-
Hi Juanito
... check whether it uses autotools, cmake, meson or something else as a build system.
Nothing like that. Just a simple Makefile complete with
comments and explanations:
tc@E310:~/astro$ cat Makefile
# Astrolog (Version 7.70) File: Makefile (Unix version)
#
# IMPORTANT NOTICE: Astrolog and all chart display routines and anything
# not enumerated elsewhere in this program are Copyright (C) 1991-2024 by
# Walter D. Pullen (Astara@msn.com, http://www.astrolog.org/astrolog.htm).
# Permission is granted to freely use, modify, and distribute these
# routines provided these credits and notices remain unmodified with any
# altered or distributed versions of the program.
#
# First created 11/21/1991.
#
# This Makefile is included only for convenience. One could easily compile
# Astrolog on most Unix systems by hand with the command:
# % cc -c -O *.cpp; cc -o astrolog *.o -lm -lX11
# Generally, all that needs to be done to compile once astrolog.h has been
# edited, is compile each source file, and link them together with the math
# library, and if applicable, the main X library.
#
NAME = astrolog
OBJS = astrolog.o atlas.o calc.o charts0.o charts1.o charts2.o charts3.o\
data.o express.o general.o intrpret.o io.o matrix.o placalc.o placalc2.o\
xdata.o xgeneral.o xdevice.o xcharts0.o xcharts1.o xcharts2.o xscreen.o\
swecl.o swedate.o swehouse.o swejpl.o swemmoon.o swemplan.o sweph.o\
swephlib.o
# If you don't have X windows, delete the "-lX11" part from the line below:
# If not compiling with GNUC, delete the "-ldl" part from the line below:
LIBS = -lm -lX11 -ldl -s
CPPFLAGS = -O -Wno-write-strings -Wno-narrowing -Wno-comment
RM = rm -f
$(NAME): $(OBJS)
cc -o $(NAME) $(OBJS) $(LIBS)
clean:
$(RM) $(OBJS) $(NAME)
#So simple a child could do it. Unless that child
is too lazy and spoiled to even try. :(
-
So simple a child could do it. Unless that child is too lazy and spoiled to even try. :(
Can't say it better myself.
History: First ask if someone can do it, and no body answer.
And then bump the thread, to get attension.
Then I suggest to the user to try compile it, and get help from this forum.
And now remove the prev thread and create i new one with the same question.
Sorry for being little helpless/help willing(if that is the correct word, don't know)
-
thanks.
I found the missing command.
tce-load -wil compiletc Xorg-7.7-dev
-
I tackled this a while back on TCL-11.1. I started by installing the essential dependencies like gcc and make. The README had some hints on required libraries, so make sure to double-check those. I had the best luck compiling on a clean TCL setup. If you hit a snag, sometimes reinstalling the dependencies or updating them helps. Hope this helps you get it running!