Tiny Core Linux
Tiny Core Base => TCB Q&A Forum => Topic started by: ghosts on February 16, 2013, 01:44:26 AM
-
Not really sure how to describe it, so I'm hoping someone can help me.
Before, there hadn't been any problems with TC and my wifi card (realtek 8188ce). It was able to detect and connect to the network easily.
However, a new network has been put in place, which will soon replace the old one. At first TC was able to connect to this one maybe once in several tries--which is problematic already. Now it refuses to connect at all. It's always the same, it always ends with "no lease, failing".
When I try to connect to the old one, it does so without fuss. But that one is going to be disconnected soon, so I need TC to work with the new connection.
I'm not sure what the problem is, so I don't know what information is necessary :-[ I'm hoping someone can help me out, as before the new wifi network TC has been pretty much perfect and I'd hate to replace it :D
-
I've read a few of the wifi-related threads here but couldn't seem to find one that solved mine. Hope this isn't a redundant thread though, but I've spent quite a bit of time trying to figure this out U^_^
-
I would check encryption type and othe settings of the new AP you can't conenct to. Use
iwlist scan
command and share result.
-
According to my windows laptop:
The old network's security type and encryption type is WPA2-Personal and AES respectively
For the new one, it's WPA-Personal and AES.
However, it seems to be different in Linux--
Running "iwlist scan" had very long results as there are several networks. I typed out the parts that seem to be related to encryption here (although I could download lxterminal or something and copy-paste if the entire output is needed)
The old network:
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Cipher (2) : CCMP TKIP
Authentication Suites (1) : PSK
The newer network shows exactly the same, actually.
Except for the numerous alphanumeric strings following the repeated "IE: Unknown"s (and it gets pretty long), there doesn't seem to be a lot of difference between the two.
-
Hi ghosts
(although I could download lxterminal or something and copy-paste if the entire output is needed)
Or, you could:
iwlist scan >> iwlist.txtand attach the file to your next post. If you prefer copy/paste, you could then:
editor iwlist.txt
-
Uhmm, what's wrong with copying from aterm?? (Or am I missing something here?)
If you don't use X, the gpm extension would allow you to copy and paste.
-
in other terminals, I'm just just to using right-click to copy and paste text; I couldn't do that with the default terminal so I assumed I couldn't =)
-
in other terminals, I'm just just to using right-click to copy and paste text
What's the point of simplicity if it's possible to complicate things? ;D
http://tinycorelinux.net/faq.html#c_p
-
Here it is:
wlan0 Scan completed :
Cell 03 - Address: 00:26:75:79:A8:0A
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=50/70 Signal level=-60 dBm
Encryption key:on
ESSID: network I'm trying to connect to
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000000f6f84de098
Extra: Last beacon: 616ms ago
IE: Unknown: 00086C656F77656E6574
IE: Unknown: 010882848B961224486C
IE: Unknown: 030106
IE: Unknown: 2A0104
IE: Unknown: 32040C183060
IE: Unknown: 2D1A6E1117FF000000010000000000000000000000000C0000000000
IE: Unknown: 3D1606050700000000000000000000000000000000000000
IE: Unknown: 3E0100
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101000003A4000027A4000042435E0062322F00
IE: Unknown: 0B05020014127A
IE: Unknown: 4A0E14000A002C01C800140005001900
IE: Unknown: DD07000C4304000000
Cell 05 - Address: 58:6D:8F:8A:D5:87
Channel:11
Frequency:2.462 GHz (Channel 11)
Quality=50/70 Signal level=-60 dBm
Encryption key:on
ESSID: old network that tc connects to, but will be replaced soon
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s
24 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000000f783f641e4
Extra: Last beacon: 753ms ago
IE: Unknown: 00064C61624E6574
IE: Unknown: 010882848B962430486C
IE: Unknown: 03010B
IE: Unknown: 2A0104
IE: Unknown: 2F0104
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: 32040C121860
IE: Unknown: 2D1AFC181BFFFF000000000000000000000000000000000000000000
IE: Unknown: 3D160B080400000000000000000000000000000000000000
IE: Unknown: 4A0E14000A002C01C800140005001900
IE: Unknown: 7F0101
IE: Unknown: DD810050F204104A00011010440001021041000100103B00010310470010A4FF60186E7FF04FFA7E2C1DAA91400A1021000C4C696E6B73797320496E632E1023000D4C696E6B7379732045323030301024000776312E302E30341042000234321054000800060050F20400011011000D4C696E6B737973204532303030100800020084
IE: Unknown: DD090010180203F0040000
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSK
IE: Unknown: DD180050F2020101800003A4000027A4000042435E0062322F00
IE: Unknown: DD1E00904C33FC181BFFFF000000000000000000000000000000000000000000
IE: Unknown: DD1A00904C340B080400000000000000000000000000000000000000
-
in other terminals, I'm just just to using right-click to copy and paste text
What's the point of simplicity if it's possible to complicate things? ;D
http://tinycorelinux.net/faq.html#c_p
old habits die hard ;D I didn't even know what a Linux distribution was maybe seven or eight months ago ^_^ In Windows, right-click is constant. . . kind of hard to get out of that mindset =)))
Anyway, thanks, I probably passed over that part when I read the FAQ =)
-
Hi ghosts
According to my windows laptop:
The old network's security type and encryption type is WPA2-Personal and AES respectively
For the new one, it's WPA-Personal and AES.
However, it seems to be different in Linux--
You scan shows:
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : CCMP TKIP
Authentication Suites (1) : PSKis missing from the new network.
-
?
I'm afraid I don't really understand. What can I do about it?
-
Hi ghosts
I was only pointing out that the Linux scan agrees with what Windows reported, the new network does not
suppport WPA2.
-
I see. So far, connection to the new network will fail 9/10 times. The "sending discovery. . ." line repeats itself a few times before failing to connect.
It's not something that has happened with the old network though :(
Is there anything I can change to be able to connect to the new network consistently?
-
Hi ghosts
I was only pointing out that the Linux scan agrees with what Windows reported, the new network does not
suppport WPA2.
thank you very much :)
I can connect to it now~
the wiki is great