Tiny Core Linux
dCore Import Debian Packages to Mountable SCE extensions => dCore Armv7 => Allwinner A10 => Topic started by: roberts on November 02, 2012, 09:12:23 PM
-
I have updated the development build of a10Core to v4.7.
See: http://distro.ibiblio.org/tinycorelinux/4.x/armv7/
-
REPOSTED was looking at the x86 repository. Fixed to look at armv7.
-
I have posted an update for a10Core SD card image and support programs.
http://code.google.com/p/tinycore-a10/downloads/list
This brings the base to 4.7.1.
By using the import tool one can easily get X working.
Together with Xtc, Xprogs, and flwm, we are quickly approaching a workable system.
This is an experimental approach, using import, as no Core specific repository is required.
-
I might add that the posted a10 image also provides a new boot code, xonly.
By using the xonly boot code, the frambuffer bterm will not be started.
This saves in memory and cpu. Note however, be absolutely certain
that you have X together with flwm starting successfully from onboot.lst.
If you boot with xonly then exittc will not allow Exit to prompt.
The default is to boot iinto frambuffer bterm and exittc allows
Exit to prompt.
Use updbootcodes program to add xonly or any other supported boot code.
Note that updbootcodes, uses the editor via environment variable EDITOR,
so be sure to have it set appropriately.
-
I have updated and posted new images 20121202.
These include the "performance" boost as suggested by GPSFan.
Also posted are READMEs, including the xorg instructions thanks to hlavery.
-
New Image posted to bring the base to v4.7.2
For download see: http://tinycorelinux.net/4.x/armv7/
For change log see: http://forum.tinycorelinux.net/index.php/topic,14560.msg82587.html#msg82587
-
New images are now posted to bring Allwinner port to 4.7.3 base.
For download see: http://tinycorelinux.net/ports.html
For Change log see: http://forum.tinycorelinux.net/index.php/topic,14617.msg82942.html#msg82942
-
New Image posted see: http://tinycorelinux.net/4.x/armv7
New updated and expanded README is also posted.
Explains how to setup from image and arrive at X desktop with new import suite.
Thanks go to hlavery for help previewing the code and contributing to the new README.
-
New images are now posted to bring Allwinner port to 4.7.4 base.
For download see: http://tinycorelinux.net/ports.html
For Change log see: http://forum.tinycorelinux.net/index.php/topic,14723.msg83628.html#msg83628
-
A major upgrade to a10Core SDCard image now posted:
a10Core-20130208.img.gz
* Updated kernel to 3.0.42.
* Inlined Core's base modules.
* Full modules set is posted: linux-sunxi-modules-3.0.42.tar.gz
* Kernel tuned for performance.
* Supports framebuffer console.
* All new updated uboot IPL & SPL
* Updated boot.scr.
-
New uCore and a10Core images dated 20130226 are now posted to bring Allwinner A10 port to 4.7.5 base.
For download see: http://tinycorelinux.net/ports.html
For Change log see: http://forum.tinycorelinux.net/index.php/topic,14949.msg85230.html#msg85230
-
A minor update to the Allwinner port, a10core-20130329.img,gz, is now available.
See: http://tinycorelinux.net/4.x/armv7/
Change log:
* Added new uEnv.txt
* Updated /opt/.xfiletool.lst
* Updated boot.scr to support uEnv.txt
* Removed now unused updbootcodes and mkimage
* Corrected link to kernel.tclocal
* Updated tce-setup for .gz loading to support startup scripts.
Note: The base a10 image remains based on Mele A1000 HDMI which likely will change in the next release.
Continue to use http://tinycorelinux.net/4.x/armv7/hardware/README-bootloader.txt as a guide for other boards.
Note: To upgrade an existing system, replace uCore, boot.scr and copy uEnv.txt.
Note: uEnv.txt is a plain text configuration file. No need to use updbootcodes, now just use your favorite editor to add / change boot parameters.
-
I have pending a major upgrade to the import suite and new image.
As a heads up, I am switching to use the Cubieboard 1GB as the basis for next posted image.
-
A minor update to the Allwinner port, a10core-20130424.img.gz, is now available.
See: http://tinycorelinux.net/4.x/armv7/
Change log:
* Updated a10Core image file. Now defaults to cubieboard 1GB version.
* Updated import suite now renamed to deb2sce, in the repository, supporting a new extension type sce.
* New loadsce to load new extension type sce with support of sceboot.lst.
* New sceboot.lst to list sces to load at boot time, after any gz but before any tcz
* Updated README files.
* Simple X setup see the respective README.
The deb2sce suite is in active development. The tcz format is still fully supported.
Note: Use http://tinycorelinux.net/4.x/armv7/hardware/README-bootloader.txt as a guide for other boards.
Note: To upgrade from prior posted system replace uCore.
Note: uEnv.txt is a plain text configuration file. No need to use updbootcodes, now just use your favorite editor to add / change boot parameters. It is in the boot partition.
-
A minor update to the Allwinner port, a10core-20130503.img.gz, is now available.
See: http://tinycorelinux.net/4.x/armv7/
This image has a few tweaks to support an updated deb2sce.tcz
deb2sce.tcz now supports meta-packages which makes for installing X desktop very simple.
The READMEs have been updated to reflect the changes.
To update from prior version just replace uCore on your boot device.
-
The Allwinner a10Core.img.gz has been updated to 4.7.7. For change log and special note ...
See: http://forum.tinycorelinux.net/index.php/topic,15353.msg88932.html#msg88932
-
The Allwinner a10Core.img.gz has been updated to the dCore concept.
See: http://tinycorelinux.net/5.x/armv7/
All READMEs have been updated to reflect this change.
See: http://tinycorelinux.net/5.x/armv7/README/
See also dCore for X86 as announced here:
http://forum.tinycorelinux.net/index.php/topic,15612.0.html
The concept behind dCore is to more easily maintain the Core philosophy across many platforms without having to build and maintain many platform specific repositories. The sce extension type introduced with earlier a10Core release has been expanded in many ways as can be seen in the dCore x86 announcement. sces are a super set of tcz with the benefits of scms, i.e, no dependencies to fuss with. By choosing Debian, we obtain access to a huge and vast repository of applications.
Much work has gone into dCore and the suite of programs that comprise import.
Please read the READMEs as they will assist in getting started with dCore for Allwiiner A10.
http://tinycorelinux.net/5.x/armv7/README/
-
The Allwinner a10Core.img.gz has been updated.
See: http://tinycorelinux.net/5.x/armv7/
* Fixed bug in sce-fetch.sh, -i now works, added -b to add to sceboot.lst
* Added initial sceboot.lst to tce-setdrive.
Updated Xsetup.sh and README-X-Desktop to reflect changes above.
-
The Allwinner a10Core.img.gz has been updated 20130712.
See: http://tinycorelinux.net/5.x/armv7/
Change log via git:
* tcemirror.sh: changed tcz to sce via roberts
* rc.shutdown: changed references tcz to sce via roberts
* added .profile to ensure proper X startup at login when qualified via roberts.
* ondemand: removed unsupported tcz references via roberts.
* Add option to track md5sums to enable update checking of SCE components via Jason
* tc-config: Updates pretce, httplist and tftplist to work with loadsce instead of tce-load via Gerald Clark
* loadsce: added full path suport via Gerald Clark
* .profile: added LANG=en_US.UTF8 to support default uxterm via roberts
* deb2sce: import -o fix via roberts
Files likely in your backup that have been changed:
.profile
For existing users on all Allwinner A10 platforms, simpy copy over the new uCore to your existing boot partition.
-
The Allwinner a10Core.img.gz has been updated 20130823.
See: http://tinycorelinux.net/5.x/armv7/Allwinner-A10
Change log see git http://git.tinycorelinux.net and announcement:
http://forum.tinycorelinux.net/index.php/topic,15799.msg92623.html#msg92623
For existing users on all Allwinner A10 platforms, simpy copy over the new uCore to your existing boot partition.