Tiny Core Linux
Tiny Core Extensions => TCE Talk => Topic started by: Daniel on September 20, 2011, 05:57:23 AM
-
In order to manage Bios parameters, i need to access to the nvram.
is it possible with TC ?
Thanks
Daniel.
-
I guess it depends what you mean with "access". Just for "fun" you could probably read some contents with commands like:
tc@box:~$ hexdump -vC /dev/nvram
00000000 00 00 00 00 00 00 0e 80 02 ff ff 00 00 00 00 00 |................|
00000010 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000020 02 8e ff ff 20 00 00 07 00 20 20 00 00 00 00 31 |.... .... ....1|
00000030 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000040 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000050 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000060 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 |................|
00000070 00 00 |..|
00000072
tc@box:~$ cat /proc/driver/nvram
Checksum status: valid
# floppies : 0
Floppy 0 type : none
Floppy 1 type : none
HD 0 type : none
HD 1 type : none
HD type 48 data: 0/0/0 C/H/S, precomp 0, lz 0
HD type 49 data: 7/32/0 C/H/S, precomp 32, lz 0
DOS base memory: 640 kB
Extended memory: 65535 kB (configured), 65535 kB (tested)
Gfx adapter : EGA, VGA, ... (with BIOS)
FPU : installed
tc@box:~$There are certainly some other tools, but I just could not be bothered to use goggle to find out more.
-
Thank you Maro!!!
In fact, i'm using flashrom for BIOS update.
I was reading http://www.pixelbeat.org/docs/bios/ (http://www.pixelbeat.org/docs/bios/)
I've got a program for nvram bios param update, but it doesn't run directly when i update from bios V1.00 to V2.20 (need reboot).
with that, i expect beeing able to do all in one boot!
Daniel.
PS: concerning flashrom, i've got flash erase pb (many case (and long time) to erase all flash).
But after, flashing BIOS is ok!
-
I make a flasrom modification!
It seems to run now :)
Daniel.