WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Success on HP 6910p  (Read 7563 times)

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Success on HP 6910p
« on: June 02, 2011, 04:15:02 PM »
Hello,
I tried TCL on this laptop. http://www.notebookjournal.de/tests/hp-6910p-14-1--417
Starting point:
- a nice hp6910p without HDD.
- USB-Adapter with CF 8GB (CF prepared with Syslinux; multiboot with different Linux; Menues adapted during the try with TCL LAN/WLAN; see below).
- LAN via Ethernet Home Adapters. WLAN in the house.
- 2 buttons+wheel USB mouse

- the laptop (TCL3.6) was in the net via LAN within few secondes. With the same method I used for my other PC, I was in my WLAN within 3 hours (Im a bit slow) after loading the intel wireless extension drivers for this laptop: see my WLAN method in http://forum.tinycorelinux.net/index.php?topic=8001.msg43118#msg43118. I could not understand how to use WICD-radar and the whole other WIFI stuff. Sorry. I will perhaps try it in my next life or when I have to go via Wifi in foreign WLANs. Very good the new boot options mydata=hp6910pu and lst=hp6910pu.lst I could use for making different start setups for this laptop (LAN/WLAN). I can send you my hp6910pu.tgz on request.
- Knoppix booted quick into LAN. Not so quick, not so impressive than TCL. WLAN did not work because I could not make the setup (keyrings were asked. I did not understand stopped further activities).
- MagicParted has to be modified a bit for the boot code with LAN. It booted fine (not so impressive than TCL) and WLAN was very easy to connect via a good WICD menu. There is something to learn for TCL.
- Slitaz did not start the Xorg. I did not try to make it working.
Conclusion: I stay with TCL. This laptop is a space shuttle with TCL (I did not try the sound; not so important for me; on request, I can test it).
Conclusion of the conclusion: if you have such a laptop (with or without HDD), make quickly an USB-Stick or a CF-card on USB-adapter with TCL and boot it via USB. THIS IS REALLY GOOD.

Issues:
- the background "bretagne" is not coming. This could be the only reason for throwing TCL out of this pc..;-). probably in syslinux, TCL dont like the path opt/backgrounds/bretagne.jpg?
- firefox (after full screen modus, only 2 times I can made it disappearing by clicking "-" on the top right, then only the "X" button on the right top is functioning and other issues with full screen modus coming automatically.. I will post when I understand when it comes up)

# CF 8GB Syslinux.cfg
#   UUID=8172-30FF
# Default boot option to use
default menu.c32
TIMEOUT 600
#Deutsche Tastaturbelegung
KBDMAP german.kbd
# Prompt user for selection
PROMPT 0
#
MENU TITLE Boot Main Menu cf 8GB which can be connected to ide adapter or usb adapter
#
F1 boot.msg
F2 f2
F3 f3
#
LABEL tcl3.6 OldBoy1 basis
   MENU LABEL tcl3.6 OldBoy1 basis
   KERNEL /boot/tcl/bzImage
   APPEND quiet vga=ask tz=GMT+1 ide_core.ignore_cable=1 noacpi noscsi nozswap showapps tce=UUID=8172-30FF kmap=qwertz/de-latin1
        initrd /boot/tcl/tinycore.gz
# ide_core.ignore_cable=1 for OldBoy1.. make different config files.. or menu for different computers?
#
LABEL tcl3.6 HP Laptop hp6910p DE LAN
   MENU LABEL tcl3.6 HP Laptop hp6910p DE LAN
   KERNEL /boot/tcl/bzImage
   APPEND quiet vga=791 tz=GMT+1 noscsi noacpi loglevel=2 bkg=bretagne.jpg showapps tce=UUID=8172-30FF mydata=hp6910p lst=hp6910p.lst kmap=qwertz/de-latin1
        initrd /boot/tcl/tinycore.gz
#
LABEL tcl3.6 HP Laptop hp6910p DE Uhl Wlan
   MENU LABEL tcl3.6 HP Laptop hp6910p DE Uhl Wlan
   KERNEL /boot/tcl/bzImage
   APPEND quiet vga=791 tz=GMT+1 noscsi noacpi loglevel=2 bkg=bretagne.jpg nozswap showapps tce=UUID=8172-30FF mydata=hp6910pu lst=hp6910pu.lst kmap=qwertz/de-latin1
        initrd /boot/tcl/tinycore.gz
#
LABEL knoppix
   MENU LABEL knoppix kbd_DE
   KERNEL linux
# APPEND ramdisk_size=100000 lang=en vt.default_utf8=0 apm=power-off vga=791 initrd=minirt.gz nomce quiet loglevel=0 tz=localtime
   APPEND ramdisk_size=100000 lang=en vt.default_utf8=0 apm=power-off vga=0x311 initrd=minirt.gz nomce quiet loglevel=0 tz=localtime
#
LABEL slitaz DE
   MENU LABEL slitaz DE
   KERNEL    /boot/slitaz/bzImage
   APPEND rw root=/dev/null quiet home=UUID=8172-30FF kmap=de-latin1 vga=788 sound=no modprobe=mga lang=en acpi=off tz=localtime
        INITRD /boot/slitaz/rootfs.gz
#
LABEL PartedMagic
   MENU LABEL PartedMagic kbd_US
   KERNEL /boot/pmagic/bzImage
   APPEND directory=boot quiet edd=off load_ramdisk=1 prompt_ramdisk=0 rw loglevel=9 max_loop=256
   INITRD /boot/pmagic/initramfs
#
LABEL memtest
   MENU LABEL memtest
   KERNEL memtest
#
LABEL HWTest
   MENU LABEL HWTest
        KERNEL hdt.c32
   APPEND modules_alias=modules.ali pciids=pci.ids modules_pcimap=modules.pci quiet
#
LABEL GoToHDD00
        Menu label GoToHDD00 (10GB OldBoy1)
        kernel chain.c32
        append hd0 0
#
LABEL GoToHDD10
        Menu label GoToHDD01 (CF8GB OldBoy1)
        kernel chain.c32
        append hd1 0
#
LABEL GoToHDD20
        Menu label GoToHDD20 (6GB OldBoy1)
        kernel chain.c32
        append hd2 0
#
APPEND foo
   MENU LABEL foo
   LABEL dos
   KERNEL memdisk
   APPEND initrd=balder.img
#
LABEL failsafe
   MENU LABEL failsafe
   KERNEL linux
   APPEND ramdisk_size=100000 lang=en vt.default_utf8=0 vga=normal atapicd nosound noapic nolapic noacpi pnpbios=off acpi=off nofstab noscsi nodma noapm nousb nopcmcia nofirewire noagp nomce nonetwork nodhcp xmodule=vesa initrd=minirt.gz
#
LABEL reboot
        MENU LABEL Reboot
        COM32 reboot.c32
#
LABEL poweroff
        MENU LABEL Power Off
        COMBOOT poweroff.com



the onboot.lst in this laptop:

kmaps.tcz
lshw.tcz
usb-utils.tcz
conky.tcz
compat-wireless-2.6.33.3-tinycore.tcz
flash10.tcz
opera.tcz
firefox.tcz
firmware-iwlwifi.tcz
« Last Edit: June 02, 2011, 05:47:48 PM by floppy »
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: Success on HP 6910p
« Reply #1 on: June 02, 2011, 05:20:29 PM »
Looking at the first link in post, there appears to be no relation to "Netbooks"...
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline labeas

  • Sr. Member
  • ****
  • Posts: 266
Re: Success on HP 6910p
« Reply #2 on: June 20, 2011, 11:00:10 PM »
Hi  floppy,

this is my first post on this forum.
I had to buy a Win device to use my wireless-modem, so I got a cheap
HP 1101 [or something] netbook, and it's now got a 8GB CF too;
apart from the 2GB RAM.

Apart from the fact that I'm operating from the 3rd world; relying
on 'the cloud' is IMO, like those who thought their house value would
keep increasing. So I want to try the 'model' where the apps are loaded
from CF.

I've d/l-ed  and preliminarily read the FAQ, wiki ..etc.
I normally d/l a dozen URL's via lynx and automatically, append all the texts
to a file for later reading.  I can't pay for spurious 'live browsing' with
childish active-smilies - like here.

Please tell me:-
* will my existing bash-scripts work, or does 'busy box' mean TC uses `ash` ?
* can it run [16 copies of] mc [midnight commander] ?
* is 'FW??' that windows manager [which I used a decade ago] which showed
   a 3x3 to represent the 9 'desktops' ?
  I can't remember if it could conveniently have multiple terminals per
    desktp; so that you could easily 'switch' to desktop 3, terminal 2 ?
* I can't remember the details, but loadlin once worked ok: does it enable
  a linux session to be run-and-exited, without losing the win-stuff?
  I guess not, because it would have to know what RAM, WIN was using?

Because I use an OO approach, rather than the MONSTER-app approach of eg.
 a 'universal browser/mailer/news-reader'; i.e. each project has its own
 dir-tree, where the files related to THAT project reside;
I need to have several `mc` open at the various dir-trees,
and be able to 'switch' to the corresponding mc, when a related item
arrives.

Under Mandrake9 & kde3, I wrote a script which showed which
 <path/file ie. dir-tree> had which Desktop,VT
so that, if I received an item for eg. "tinyCore" I could see that it could
be 'handled' by Desktop 4, VT/consol 3;
instead of hysterically searching through 20 VT on the 4 desktops.

When I upgraded to slak13+xcfe my script no longer worked, and my whole
work-style is disrupted.

== TIA.

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11573
Re: Success on HP 6910p
« Reply #3 on: June 21, 2011, 12:34:00 AM »
Hi labeas

You probably should have started a separate thread for this but I'll try to give you some answers.

Busybox uses ash, however, you can get bash by installing util-linux-ng.tcz
Tinycore comes with the fast light window manager. It does offer multiple desk tops.
You can open multiple terminals and copies of mc. I don't know what the limit is, I just opened 20
terminals with no problems on a machine with 512MB and no swap.

There are several different boot loaders available which allow Linux and Windows to co-exist.

Offline labeas

  • Sr. Member
  • ****
  • Posts: 266
Re: Success on HP 6910p
« Reply #4 on: June 24, 2011, 05:13:10 PM »
Thanks for confirming that TC can manage 20 terminals, even with restricted
RAM. I had a look at the screenshot of the <desktop>,and it's not clear how/if
the VTs would be kept in ORDER. The last thing we need, is another M$-like
mess where the <papers are scattered over the desk>.
Has any body seen the superior way that Oberon [S3 & V4] does it - dating from
decades ago.  Imagine if paper books, didn't have <ordered binding & a fixed
location index>? Why does computing replace proven functionality by arty-crap?
---------
Apart from manually keeping an index of which VT has a certain <path>, how
would you know that VT:17 had the <path related to the email which has arrived>?
How would you swith to VT:17? KDE & xfce can be swithed eg. to Desktop4, VT3.

Thanks,

== labeas.

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11573
Re: Success on HP 6910p
« Reply #5 on: June 24, 2011, 09:28:28 PM »
Hi labeas

Quote
Thanks for confirming that TC can manage 20 terminals, even with restricted RAM.
That was in addition to Wireshark, Geany and Opera.

Quote
Why does computing replace proven functionality by arty-crap?
So that the arty people can say  "Ooooh, look, shiny" and then tell themselves they are innovators.

There are also other window managers available for Tinycore. I believe there are a couple of tiling
window managers too, if that's what you are looking for. A search through the forums and/or
AppBrowser might turn up something workable for you. If not, you can download the source for a
window manager you like and compile it using the  compiletc  extension.

As far as identifying which terminal is which I'll defer to someone else's expertise for now.