WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki
« previous next »
Pages: [1]   Go Down

Author Topic: (solved) how to use emprint?  (Read 4135 times)

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
(solved) how to use emprint?
« on: May 08, 2011, 04:45:20 PM »
hello,
I installed the TCE "emprint" for making a screen print of my pc.
How does it work? by putting "emprint" in a terminal, nothings comes up (no windows, no error etc.).
I have xorg7.4.
Regards.

Conclusion (14.05.2011): use the printscreen function in TCL. I dont need to use emprint (I still dont know how to use it..)
« Last Edit: May 14, 2011, 04:28:06 AM by floppy »
Logged
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11044
Re: how to use emprint?
« Reply #1 on: May 09, 2011, 05:46:24 AM »
There's a screenshot menu option in the base?
Logged
The only barriers that can stop you are the ones you create yourself.

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: how to use emprint?
« Reply #2 on: May 09, 2011, 01:24:50 PM »
Quote from: curaga on May 09, 2011, 05:46:24 AM
There's a screenshot menu option in the base?
sorry, I dont understand
Logged
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline curaga

  • Administrator
  • Hero Member
  • *****
  • Posts: 11044
Re: how to use emprint?
« Reply #3 on: May 09, 2011, 01:33:07 PM »
I just wonder why use an extension, when you can take screenshots without any.
Logged
The only barriers that can stop you are the ones you create yourself.

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: how to use emprint?
« Reply #4 on: May 09, 2011, 01:39:08 PM »
..how?
Logged
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11618
Re: how to use emprint?
« Reply #5 on: May 09, 2011, 01:56:15 PM »
Hi floppy
Click on the desktop, go to SystemTools, click on ScreenShot.
Logged

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: how to use emprint?
« Reply #6 on: May 14, 2011, 04:29:34 AM »
Quote from: Rich on May 09, 2011, 01:56:15 PM
Hi floppy
Click on the desktop, go to SystemTools, click on ScreenShot.

this is a good recommendation.
Logged
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: how to use emprint?
« Reply #7 on: May 14, 2011, 07:16:33 AM »
Quote from: floppy on May 14, 2011, 04:29:34 AM
Quote from: Rich on May 09, 2011, 01:56:15 PM
Hi floppy
Click on the desktop, go to SystemTools, click on ScreenShot.

this is a good recommendation.

see also:
http://forum.tinycorelinux.net/index.php?topic=7051.0
Logged
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline Rich

  • Administrator
  • Hero Member
  • *****
  • Posts: 11618
Re: (solved) how to use emprint?
« Reply #8 on: May 14, 2011, 11:20:26 AM »
Hi floppy
It was curaga's recommendation, I just walked you through the steps.
Logged

Offline floppy

  • Hero Member
  • *****
  • Posts: 577
Re: (solved) how to use emprint?
« Reply #9 on: May 14, 2011, 02:04:32 PM »
Quote from: Rich on May 14, 2011, 11:20:26 AM
Hi floppy
It was curaga's recommendation, I just walked you through the steps.

sorry if I forgot semebody or if I did not answer to a correct way. THANKS to both!
Logged
AMD K6-IIIATZ 550MHz MB DFI K6xv3/+66
P4 HP DC7100 3GB 3GHz
Samsung NC10 boot from SD card port (via USB reader)
.. all TinyCore proofed
Pages: [1]   Go Up
« previous next »