Tiny Core Base > TCB Q&A Forum

requesting help for 2 internet key

(1/5) > >>

vinnie:
i have 2 intertet key and would want to succeed to connect at least one of the two that to short I will go outside for a few time.
One is huawey E173 and other is MBD-220HU, of this I possess a handbook but i don't have capacity to understanding it

http://dl.dropbox.com/u/10544567/Mobidata%20Hspa%20IMPOSTAZIONI%20PER%20Linux.pdf

vinnie:
I managed to switches mode to one of two modems with usb_modeswitch.
I compile wvdial, but I can not get it to work:
This is my /etc/wvdial.conf:

--- Code: ---[Dialer Defaults]
Phone = *99#
Username = wind
Password = wind
Stupid Mode = 1
Dial Command = ATD
Modem = /dev/ttyUSB2
Baud = 460800
Init1= ATZ
Init2 = AT+CGDCONT=1,"IP","internet.wind"
ISDN = 0
Modem Type = Analog Modem
PPPD = /usr/local/sbin/pppd
Carrier Check = no
--- End code ---
But, after i ran wvdial:


--- Code: ---root@box:~# wvdial
--> WvDial: Internet dialer version 1.61
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: AT+CGDCONT=1,"IP","internet.wind"
AT+CGDCONT=1,"IP","internet.wind"
OK
--> Modem initialized.
--> Sending: ATD*99#
--> Waiting for carrier.
ATD*99#
ERROR
--> Invalid dial command.
--> Disconnecting at Sat Apr  9 14:54:15 2011
root@box:~#

--- End code ---

I hope someone can help me

Guy:
What happens if you use ATDT instead of ATD?

Also try atdt

vinnie:
Yes, but this has not resolved the situation.
Actually I did several tests by changing the file wvdial.conf
To this I would ask if you could help me understand if the problem is different.
Maybe even trying to bypass with pppd.

I are forced to hurry because in a week, if not solve, the only way to connect is to use windows, and I do not like  :'(

maro:
vinnie: I take it you have checked that your service provider is indeed using '*99#' as the number to dial.

Navigation

[0] Message Index

[#] Next page