WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: How to install local tcz on another workstation  (Read 3282 times)

Offline TroyB

  • Newbie
  • *
  • Posts: 37
How to install local tcz on another workstation
« on: November 07, 2010, 05:57:18 AM »
Hi All,

I just started using TCL for a couple of days now and loving over the other over bloated distro. I am in the process of install in on another workstation and have the base setup installed.

I just copy the /tce/optionals fold with all the program I install on this workstation that I am typing this request. I have move all the tcz over to the same location I have copy it from to the new workstation and when I install the same programs using appsbroswer local, it installs on the bar (wbar) but it does not stay there on the reboot.

Is there away I can make it stay there for use?

thanks for your time.

Offline Guy

  • Hero Member
  • *****
  • Posts: 1089
Re: How to install local tcz on another workstation
« Reply #1 on: November 07, 2010, 06:21:09 AM »
I am not sure exactly what you have done.

Try Apps Audit, then On Boot or On Demand, then maintenance. Click on any extensions (on the left) you want in On Boot or On Demand.
Many people see what is. Some people see what can be, and make a difference.

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: How to install local tcz on another workstation
« Reply #2 on: November 07, 2010, 07:32:19 AM »
Hi Guy,

Thanks for the prompt reply,

Sorry for the confusing post, what I have done is copy the mnt/sda1/tce/optionals fold, which has the tcz programs I installed on this workstation to another workstation in the same location and tried to install the same programs on it.

I tried what you have suggested and it works for one program (evince), but the only problem now is that when I added the other programs to onboot and rebooted it. I am at the command line telling the that it can't find the folder or directory, as well it is out of space. This is when it was suppose to boot into the GUI.

Is there a way I can remove the list of things in the onboot? or why it doesn't boot all the request apps?

The workstation is a PIII with 256mb.

Thanks again for your help

Offline Guy

  • Hero Member
  • *****
  • Posts: 1089
Re: How to install local tcz on another workstation
« Reply #3 on: November 07, 2010, 07:38:01 AM »
You can remove them by going back to Apps Audit and clicking on them.

If you are out of RAM space, you would be better using On Demand. You should also set up a swap partition, if you have not done so already.

When you say out of space, it may be hard drive space.
Many people see what is. Some people see what can be, and make a difference.

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: How to install local tcz on another workstation
« Reply #4 on: November 07, 2010, 07:46:16 AM »
Hi Guy

The workstation has a 40gig hdd and I allocated about 1.5gig for swap. I have added swapfile=hda2 in my grub.cfg. But I can't get into the GUI right now to remove in appsaudit, is there away I can remove them in the command line?

Sorry, I'm just learning my away around.

Thanks again
« Last Edit: November 07, 2010, 08:05:20 AM by TroyB »

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14786
Re: How to install local tcz on another workstation
« Reply #5 on: November 07, 2010, 08:04:56 AM »
You just need to edit /tce/onboot.lst

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: How to install local tcz on another workstation
« Reply #6 on: November 07, 2010, 08:24:44 AM »
Thank you Juanito & Guy for all your help...an old workstation saved from the dumps.

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: How to install local tcz on another workstation
« Reply #7 on: November 07, 2010, 01:03:29 PM »
With those specs it would be more likely to run out of space on tmpfs.
You can check by:
Code: [Select]
df |grep tmpfs
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: How to install local tcz on another workstation
« Reply #8 on: November 08, 2010, 05:20:15 PM »
Hi Tinypoodle.

This is the outcome of as per request.

tmpfs                   258504     46660    211844  18% /
tmpfs                   143612         0    143612   0% /dev/shm
total 4
drwxr-xr-x   16 root     root           360 Nov  9 09:05 .
drwxr-xr-x   16 root     root           360 Nov  9 09:05 ..
drwxr-xr-x    2 root     root          1380 Nov  9 09:03 bin
drwxr-xr-x   13 root     root          6900 Nov  9 09:09 dev
drwxr-xr-x   10 root     root           800 Nov  9 09:09 etc
drwxr-xr-x    3 root     root            60 Nov  5 16:30 home
-rwxr-xr-x    1 root     root           370 Aug 16 20:21 init
drwxr-xr-x    4 root     root           880 May 12 11:25 lib
lrwxrwxrwx    1 root     root            37 Nov  9 09:05 libx11-xcb.tcz -> /tmp/tcloop/libx11-xcb/libx11-xcb.tcz
drwxr-xr-x    6 root     root           120 Nov  9 09:06 mnt
drwxrwsr-x    3 root     staff          240 Nov  9 09:06 opt
dr-xr-xr-x  204 root     root             0 Nov  9 09:03 proc
drwxr-xr-x    2 root     root           100 Nov  9 09:12 root
drwxr-xr-x    2 root     root          1100 Nov  9 09:03 sbin
drwxr-xr-x   12 root     root             0 Nov  9 09:03 sys
drwxrwxrwt    8 root     staff          320 Nov  9 09:12 tmp
drwxr-sr-x    7 root     staff          140 Apr  6  2010 usr
drwxr-xr-x    8 root     root           180 May 28 16:17 var

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: How to install local tcz on another workstation
« Reply #9 on: November 08, 2010, 05:31:03 PM »
I can't figure what "out of space" would refer to...
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)

Offline TroyB

  • Newbie
  • *
  • Posts: 37
Re: How to install local tcz on another workstation
« Reply #10 on: November 08, 2010, 05:40:09 PM »
Tinypoodle,

Would this messages show up on dmesg?

Offline tinypoodle

  • Hero Member
  • *****
  • Posts: 3857
Re: How to install local tcz on another workstation
« Reply #11 on: November 08, 2010, 05:59:10 PM »
I have no idea really...

Also you could boot with parameter 'syslog' and could then examine /var/log/messages
"Software gets slower faster than hardware gets faster." Niklaus Wirth - A Plea for Lean Software (1995)