Sound on AMD Geode LX800

[s3704ssv]

@curaga

there is this difference which I see from the stock OSS.tcz which came from our tinycore repository and that of what I've made
ossmix result [stock OSS.tcz in repository]:

Selected mixer 0/AC97 Mixer (ALC203)
Known controls are:
vol [<leftvol>:<rightvol>] (currently 50:50)
vol.rec ON|OFF (currently OFF)
pcm [<leftvol>:<rightvol>] (currently 50:50)
speaker <monovol> (currently 0)
line [<leftvol>:<rightvol>] (currently 32:32)
line.rec ON|OFF (currently ON)
mic <monovol> (currently 0)
mic.rec ON|OFF (currently OFF)
igain [<leftvol>:<rightvol>] (currently 50:50)
aux1 [<leftvol>:<rightvol>] (currently 32:32)
aux1.rec ON|OFF (currently OFF)
spdout.enable ON|OFF (currently OFF)
spdout.adc/dac ON|OFF (currently OFF)
spdout.pro <Consumer|Professional> (currently Consumer)
spdout.audio <AUDIO|DATA> (currently AUDIO)
spdout.copy ON|OFF (currently OFF)
spdout.pre-emph ON|OFF (currently OFF)
spdout.rate <48000|44100|32000> (currently 48000)
spdout.vbit ON|OFF (currently OFF)

ossmix result [stock OSS-Geode.tcz of what I've made]:

Selected mixer 0/W
Known controls are:
Unknown mixer extension type 10551382 (Y1) (Read-only)
Unknown mixer extension type 10879063 (X1)
Unknown mixer extension type 10747994 (Y) (Read-only)
Unknown mixer extension type 10813528 (X2) (Read-only)
Unknown mixer extension type 10682454 (W) (Read-only)
Unknown mixer extension type 10616919 (X1)
Unknown mixer extension type 10485848 (Y) (Read-only)
Unknown mixer extension type 10879065 (V) (Read-only)
line [<leftvol>:<rightvol>] (currently 32:32)
line.rec ON|OFF (currently ON)
mic <monovol> (currently 0)
mic.rec ON|OFF (currently OFF)
igain [<leftvol>:<rightvol>] (currently 75:75)
aux1 [<leftvol>:<rightvol>] (currently 32:32)
aux1.rec ON|OFF (currently OFF)
spdout.enable ON|OFF (currently OFF)
spdout.adc/dac ON|OFF (currently OFF)
spdout.pro <Consumer|Professional> (currently Consumer)
spdout.audio <AUDIO|DATA> (currently AUDIO)
spdout.copy ON|OFF (currently OFF)
spdout.pre-emph ON|OFF (currently OFF)
spdout.rate <48000|44100|32000> (currently 48000)
spdout.vbit ON|OFF (currently OFF)
vmix0-enable ON|OFF (currently ON)
vmix0-rate <decimal value> (currently 48000) (Read-only)
vmix0-src <High|OFF> (currently Fast)
vmix0-outvol <monovol> (currently 24.7 dB)
vmix0-invol <monovol> (currently 25.0 dB)
vmix0.pcm1 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm2 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm3 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)
vmix0.pcm4 [<leftvol>:<rightvol>] (currently 25.0:25.0 dB)

The current OSS that I have built is ok, yet those difference gives me to think..., any insights for this?

[aus9]

hi

I am not a sound expert nor do I have your hardware.

If (and ONLY if) you decide to re-look at alsa can you post some results if interested.

1) allegedly...your sound module is .....snd-cs5535audio for alsa.

so run and post results for

Code: [Select]

lsmod | grep snd
cat /proc/interrupts

the request for interrupts is because I have read there are some bios issues.

2) In your first post you say you have the 5535......can you confirm by running  

Code: [Select]

lspci | grep Audio please?...no need to post results unless different from 5535.

3) In your first post you say no sound.....if you run alsamixer....did a mixer window appear in your terminal?

if so can you show a snapshot of it pls?

good luck