Tiny Core Extensions > TCE 3.x
Xorg 7.5
curaga:
Xorg 7.5 now available!
Highlights from 7.4 include new hardware support, such as Nvidia ION, and 3d support for Radeon r600/r700.
With this modularized release, pick either Xorg-7.5.tcz or Xorg-7.5-3d.tcz and all deps shall be gotten for you (with the possible exception of firmware; Radeon 3d requires the firmware.tcz extension, for example).
Minimum requirement is 3.0alpha5.
--- Quote ---Title: Xorg-7.5-3d.tcz
Description: Accelerated 3d drivers
Version: 7.5 (1.7.7)
Author: Various
Original-site: http://x.org
Copying-policy: X11
Size: 12.8M
Extension_by: Curaga
Comments: If you want Xorg with 3d, this extension is all you
need.
Change-log:
Current: 2010/05/28 Original
--- End quote ---
--- Quote ---Title: Xorg-7.5-bin.tcz
Description: Binaries from Xorg
Version: 7.5 (1.7.7)
Author: Various
Original-site: http://x.org
Copying-policy: X11
Size: 304.0K
Extension_by: Curaga
Comments: All binaries from Xorg that don't have dependencies.
Change-log:
Current: 2010/05/28 Original
--- End quote ---
--- Quote ---Title: Xorg-7.5-dev.tcz
Description: X development files
Version: 7.5 (1.7.7)
Author: Various
Original-site: http://x.org
Copying-policy: X11
Size: 1.8M
Extension_by: Curaga
Comments:
Change-log:
Current: 2010/06/01 Original
--- End quote ---
--- Quote ---Title: Xorg-7.5-lib.tcz
Description: Xorg 7.5 libraries
Version: 7.5 (1.7.7)
Author: Various
Original-site: http://x.org
Copying-policy: X11
Size: 176.0K
Extension_by: Curaga
Comments: This extension supercedes Xlibs_support.tcz.
Change-log:
Current: 2010/05/28 Original
--- End quote ---
--- Quote ---Title: Xorg-7.5.tcz
Description: X.org server
Version: 7.5 (1.7.7)
Author: Various
Original-site: http://x.org
Copying-policy: X11
Size: 9.8M
Extension_by: Curaga
Comments: To run confless, restart X after loading the extension.
If you need to configure something, such as a keymap, or
have trouble with autodetection, create a xorg.conf.
.
If you are only looking to get software 3D
and no accel, instead of creating a config file
suitable for your hardware like below, you can rename
/etc/X11/xorg.conf.vesa to xorg.conf.
.
To get Xorg with accel, exit to prompt,
get a root console (sudo su), and then
Xorg -configure
.
Edit the newly created config file as needed.
When ready copy it to /etc/X11 named xorg.conf.
Remember to add this file to your backup (/opt/.filetool.lst)
or save it some other way.
.
See Xorg-7.5-3d.tcz for acceleration.
.
Please note, for AGP or integrated AGP cards such as Intel
chips you will always need graphics-KERNEL.tcz.
.
Tips on 3D and X keymaps can be found in
/etc/X11/README.xorg.conf.
Change-log:
Current: 2010/05/28 Original
--- End quote ---
The following two drivers are separate, because they hang/segfault X -configure. If you need either one, it needs to be grabbed separately.
--- Quote ---Title: Xorg-7.5-vmware.tcz
Description: VMWare Xorg driver
Version: 7.5 (1.7.7)
Author: Various
Original-site: http://x.org
Copying-policy: X11
Size: 28K
Extension_by: Curaga
Comments:
Change-log:
Current: 2010/05/31 Original
--- End quote ---
--- Quote ---Title: Xorg-7.5-xgi.tcz
Description: XGI (/XP) Xorg driver
Version: 7.5 (1.7.7)
Author: Various
Original-site: http://x.org
Copying-policy: X11
Size: 164K
Extension_by: Curaga
Comments:
Change-log:
Current: 2010/05/31 Original
--- End quote ---
jur:
Right. Just a quick 1-for-1 replacement didn't work - it failed to start. Had a quick sniff around but haven't found anything obvious yet.
curaga:
Log & dmesg? Also, if this is an Intel chip, remember to remove all "nomodeset", "modeset=0" etc params, Intel on 7.5 requires KMS.
Arslan S.:
are you planning to adjust all dep files ?
Xorg-7.4 --> Xorg-7.5
Xorg-7.4-dev --> Xorg-7.5-dev
Xlibs_support --> Xorg-7.5-lib
jur:
Thanks, just back from the garage working on my bicycle; saw your nomodeset tip and it worked. Thanks!
Navigation
[0] Message Index
[#] Next page
Go to full version