WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: [intel igp] using 915resolution or xorg  (Read 9193 times)

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14640
Re: [intel igp] using 915resolution or xorg
« Reply #15 on: June 30, 2010, 12:08:50 PM »
3. Download graphics-2.6.29.1-tinycore.tcz (I tried it under TC 3 too with graphics-2.6.33.3-tinycore.tcz and resolution changed 1280x800 inmediately in commandline just after download)

There's two different things here:

In tc-3, loading graphics-2.6.33.3-tinycore will cause the i915 module to load and put the console mode into kms - i.e. high resolution/small font

In tc-2, loading graphics-2.6.29.1-tinycore will not cause this to happen (kms wasn't implemented) and, in my experience, the agpgart and i915 modules will not autoload

Offline bgpbupii

  • Newbie
  • *
  • Posts: 4
Re: [intel igp] using 915resolution or xorg
« Reply #16 on: June 30, 2010, 12:23:49 PM »
After step 2 if I enter 'startx' the result is the same when I just let boot with default settings: Black screen with X at the middle, however resolution seems to be ok the cursor is not moving... 

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14640
Re: [intel igp] using 915resolution or xorg
« Reply #17 on: June 30, 2010, 01:13:12 PM »
Ah OK, after step 2, you need to use "xsetup.sh" or manually edit .xsession to set the desired resolution and mouse before "startx"