Tiny Core Base > CorePlus

Wifi doesn't work and firmware b43 not found

(1/2) > >>

Onktebong:
I've installed CorePlus to the HDD and am using an Ethernet cable ... because Wifi doesn't work.
During bootup I get the message:
ERROR: 'Firmware file "b43/ucode13.fw" not found' and a link to download it from kernel.org ... which doesn't work ... but I still managed to get the file from Github:
broadcom-wl-6.30.163.46.tar.bz2
Now, what do I do with it, where do I put it?
Thank you.

patrikg:
The firmware in tc are in tcz like:

--- Code: ---firmware-broadcom_bcm43xx.tcz
firmware-broadcom_bnx2.tcz
firmware-broadcom_bnx2x.tcz
--- End code ---

You can see the list here:
http://tinycorelinux.net/16.x/x86/tcz/

So i think firmware-broadcom_bcm43xx.tcz whould be first candidate. :)

Rich:
Hi Onktebong
Install  squashfs-tools.tcz.
Then:

--- Code: ---mkdir -p pkg/lib/firmware/broadcom/b43/
cp ucode13.fw pkg/lib/firmware/broadcom/b43/
mksquashfs pkg ucode13.tcz -noappend
--- End code ---

Copy  ucode13.tcz  to your  tce/optional/  directory.
Place  ucode13.tcz  on the first line of  tce/onboot.lst

Rich:
Hi patrikg
I don't see  ucode13.fw  listed in:
http://tinycorelinux.net/16.x/x86/tcz/provides.db

aus9:
I am on TC64 16x on a tower no wifi card

--- Code: ---tce-load -i wireless-KERNEL
modinfo b43 | grep firmware
firmware:       b43/ucode9.fw
firmware:       b43/ucode42.fw
firmware:       b43/ucode40.fw
firmware:       b43/ucode5.fw
firmware:       b43/ucode30_mimo.fw
firmware:       b43/ucode33_lcn40.fw
firmware:       b43/ucode29_mimo.fw
firmware:       b43/ucode26_mimo.fw
firmware:       b43/ucode25_mimo.fw
firmware:       b43/ucode25_lcn.fw
firmware:       b43/ucode24_lcn.fw
firmware:       b43/ucode16_mimo.fw
firmware:       b43/ucode16_lp.fw
firmware:       b43/ucode15.fw
firmware:       b43/ucode14.fw
firmware:       b43/ucode13.fw
firmware:       b43/ucode11.fw
--- End code ---

If your dmesg claims you only need one then download and inject one.
You may like to report the output of

--- Code: ---dmesg | grep firmware
dmesg | grep error
--- End code ---

anyhow you need the raw file and I found one here
https://github.com/OpenELEC/wlan-firmware/raw/refs/heads/master/firmware/b43/ucode13.fw

assuming firmware pathway is /usr/local/lib/firmware/b43
then use root powers to copy from Downloads dir to that path something like

--- Code: ---cd Downloads
[ -d /usr/local/lib/firmware/b43 ] || sudo mkdir -p /usr/local/lib/firmware/b43
sudo cp ucode13.fw  /usr/local/lib/firmware/b43/
--- End code ---

add usr/local/lib/firmware/b43 to your backup file called /opt/.filetool.lst

reboot and try again...depending on your dmesg errors
good luck

You may need more firmware

Navigation

[0] Message Index

[#] Next page