Tiny Core Base > Corepure64

Alsamixer cannot find card 0

<< < (3/4) > >>

Rich:
Hi gharig
Try this:

--- Code: ---tce-load -w graphics-KERNEL
--- End code ---
Then add  graphics-KERNEL.tcz  to the beginning of  onboot.lst.
Reboot and see if anything changed.

You could also try this:

--- Code: ---modprobe -r  snd_hda_intel
modprobe snd_hda_intel options enable=0,1 index=0
--- End code ---

gharig:
Hi Rich,

I stated this in the past, you are a pure genius....

I added the graphics-KERNEL to the onboot.lst, crossed my fingers, rebooted...
And that was it, suddenly alsamixer worked, aplay worked, speaker-test worked, speakers are humming.

Small setback monitor screen shrunk a bit in size, but I'm sure I will get that set fixed.


Thank you for all you help
Very much appreciated
gharig


P.S.
I have another request that I'm going to start a new post on about multiport serial connections and setserial,
talk to you soon.

Rich:
Hi gharig
Glad to hear it's working.

I am curious though, you said TC13, TC14, and TC15 worked.
Was graphics-KERNEL loaded in those environments?

gharig:
Hi Rich,

I did not load the graphics-KERNEL.tcz on 13, 14 or 15.  I would install the O/S from a USB and then obtain all the alsa-config.tcz and alsa.tcz files along with their dependencies, and that is all I would do, and it worked.

Not sure why 16 needs the graphics-KERNEL, But I too am glad that it works now.

Thank you again for all your help.
gharig   

Juanito:
If your hardware supports hmdi audio, you would need graphics-KERNEL for it to work.

Navigation

[0] Message Index

[#] Next page

[*] Previous page