Tiny Core Base > Alpha Releases

Tiny Core 16.0 Alpha 1 Testing

<< < (7/16) > >>

Knoppix1337:
I ordered a serial null modem cable, the Wyse V Series (Vx0) has onboard serial, as well as my desktop machine. I used the kernel parameter
--- Code: ---console=ttyS0,115200n8
--- End code ---
for all 3 of these.

The printk is from the debug kernel you sent.

The failsafe is the cheatcodes from the Knoppix failsafe boot option containing:
--- Code: ---APPEND lang=en vga=normal atapicd nosound noapic nolapic noacpi pnpbios=off acpi=off nofstab noscsi nodma noapm nousb nopcmcia nofirewire noagp nomce libata.force=noncq hpsa.hpsa_allow_any=1 nonetwork nodhcp xmodule=vesa initrd=/boot/rootfs.gz,/boot/modules.gz ignore_loglevel no3d nofb console=ttyS0,115200n8

--- End code ---

Obviously some parameters are ignored by TC.

Rich:
Hi Knoppix1337
What happens with this boot code:

--- Code: ---via-rhine.avoid_D3
--- End code ---
or this one:

--- Code: ---module_blacklist=via-rhine
--- End code ---

Rich:
Hi Knoppix1337
One more thing. What happens if you boot without the
Lexar 8 GB USB Flash Drive plugged in?

Knoppix1337:
After a few tries I realized it should be:
--- Code: ---via_rhine.avoid_D3
--- End code ---
or
--- Code: ---module_blacklist=via_rhine
--- End code ---
but the system still hung.

As far as the USB Lexar flash drive, I booted from the internal IDE flash DOM with no change.
I even used a PS/2 keyboard and both disabled USB in the BIOS as well as the kernel with the cheatcode:
--- Code: ---usbcore.nousb
--- End code ---
again with no change.

Juanito:
I tested labwc-config with tc-16.x x86_64 and the fltk gui applets seem to work as expected.

Navigation

[0] Message Index

[#] Next page

[*] Previous page