Tiny Core Base > TCB Q&A Forum

The latest version 15 comes with a telnet client, which is a strange issue!

(1/2) > >>

worm:
I use the latest version 15's built-in telnet command to run it on the terminal: telnet 192.168.1.1. The server is Huawei's optical modem. When entering the login interface, it will automatically enter a long string of rxvt and repeat it continuously! Causing it to be unusable at all! Has anyone encountered it before? Please find attached a screenshot.

gadget42:
what is the model number and firmware version of the optical modem

Rich:
Hi worm
You probably need to enable telnet access first. I suspect you
first need to connect to the modem with a web browser through
your LAN (192.168.1.1) and login. You will need to search online
for your model number to find instructions on logging in and
configuring the modem.

worm:

--- Quote from: gadget42 on November 28, 2024, 10:06:25 PM ---what is the model number and firmware version of the optical modem

--- End quote ---
It's okay with this, I can log in normally with Putty!

worm:

--- Quote from: Rich on November 28, 2024, 10:48:50 PM ---Hi worm
You probably need to enable telnet access first. I suspect you
first need to connect to the modem with a web browser through
your LAN (192.168.1.1) and login. You will need to search online
for your model number to find instructions on logging in and
configuring the modem.

--- End quote ---
Guangmao has already opened the telnet port, and if you use Putty, you can log in normally. Just using the system's built-in telnet doesn't work.

Navigation

[0] Message Index

[#] Next page