WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: Tinycore64 works fine with wireguard  (Read 1393 times)

Offline abru

  • Newbie
  • *
  • Posts: 7
Tinycore64 works fine with wireguard
« on: April 03, 2024, 10:25:49 AM »
tinycore64 works well with wireguard. Tested with TinyCorePure64-15.0.iso   
Since the kernel is already prepared for this, the procedure is very simple. I did my test with a Fritz!Box, where I defined wireguard. Below are the steps for this quick test:

Code: [Select]
tc@box:~$ sudo mkdir /etc/wireguard
tc@box:~$ sudo chmod 700 /etc/wireguard
tc@box:~$ sudo cp /mnt/sdb1/wireguard/test.conf /etc/wireguard
tc@box:~$ tce-load -wi wireguard-tools
tc@box:~$ sudo echo etc/wireguard >> /opt/.filetool.lst
tc@box:~$ filetool.sh -b

tc@box:~$ wg-quick up test

tc@box:~$ sudo wg
interface: test
  public key: HPa18bYMOHxxfQk1Xs123pRqoGdn65/us8zFOem6VE=
  private key: (hidden)
  listening port: 55172
  fwmark: 0xca6c

peer: aiJmPydMxuzCbx123YtLN0c++NaEK98kmI+piV6SYGQ=
  preshared key: (hidden)
  endpoint: xx.226.230.xx:56012
  allowed ips: 0.0.0.0/0
  latest handshake: 1 minute, 58 seconds ago
  transfer: 2.44 MiB received, 296.99 KiB sent
  persistent keepalive: every 25 seconds

tc@box:~$ wg-quick down test

    [Edit]: Added code tags.  Rich
« Last Edit: April 03, 2024, 10:32:36 AM by Rich »