PXE Boot

[Rabie]

Hi Rich,

everytime i reboot my client, i get the following on the Server but not in /var/log/messages

Code: [Select]

udpsvd: start 12490 132.147.160.190:69-132.147.161.71:2070
udpsvd: status 1/30
udpsvd: start 12491 132.147.160.190:69-132.147.161.71:2071
udpsvd: status 2/30
udpsvd: end 12490 exit 1
udpsvd: status 1/30
udpsvd: end 12491 exit 0
udpsvd: status 0/30



[Rich]

Hi Rabie
Does this show any relevant errors:

Code: [Select]

dmesg | tail -n 25

[Rabie]

Hi Rich,

nothing relevant to tftpd:

Code: [Select]

dmesg | tail -n 25
i915 0000:00:02.0: [drm] failed to retrieve link info, disabling eDP
[drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
ACPI: video: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input7
Registered IR keymap rc-cec
rc rc0: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0
input: DP-1 as /devices/pci0000:00/0000:00:02.0/rc/rc0/input8
fbcon: i915 (fb0) is primary device
Console: switching to colour frame buffer device 210x65
i915 0000:00:02.0: [drm] fb0: i915 frame buffer device
iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:01:00.0: FW already configured (0) - re-configuring
r8169 0000:02:00.0: Direct firmware load for rtl_nic/rtl8168g-2.fw failed with error -2
r8169 0000:02:00.0: Falling back to sysfs fallback for: rtl_nic/rtl8168g-2.fw
Generic FE-GE Realtek PHY r8169-0-200:00: attached PHY driver (mii_bus:phy_addr=r8169-0-200:00, irq=MAC)
r8169 0000:02:00.0 eth0: Link is Down
Generic FE-GE Realtek PHY r8169-0-300:00: attached PHY driver (mii_bus:phy_addr=r8169-0-300:00, irq=MAC)
r8169 0000:03:00.0 eth1: Link is Down
r8169 0000:02:00.0 eth0: Link is Up - 1Gbps/Full - flow control rx/tx
wlan0: authenticate with b0:a7:b9:85:be:b6
wlan0: send auth to b0:a7:b9:85:be:b6 (try 1/3)
wlan0: send auth to b0:a7:b9:85:be:b6 (try 2/3)
wlan0: send auth to b0:a7:b9:85:be:b6 (try 3/3)
wlan0: authentication with b0:a7:b9:85:be:b6 timed out



[Rich]

Hi Rabie
It looks like 2 requests are being made, with the first one failing and the second succeeding:

Code: [Select]

udpsvd: start 12490 132.147.160.190:69-132.147.161.71:2070    # First request made
udpsvd: status 1/30
udpsvd: start 12491 132.147.160.190:69-132.147.161.71:2071    # Second request made
udpsvd: status 2/30
udpsvd: end 12490 exit 1                                      # First request failing
udpsvd: status 1/30
udpsvd: end 12491 exit 0                                      # Second request succeeding
udpsvd: status 0/30
Your reply #26 appears to show the same.