Bug in APP while removing an application

[destroyedlolo]

Hello,

I found a nasty bug in APP.
I installed dillo but I decided to remove it as it's too limited for my need.

I used APP, and mark Dillo for removal : unfortunately, it removed ALL the dependencies without checking if they are used elsewhere ... and among them, it was fltk-1.3.

Consequently, my desktop doesn't work anymore.

The solution was obvious, but it's very dangerous.

Bye

Laurent

[Rich]

Hi destroyedlolo
Well, you did not state which version of TC and which architecture
you are running.

I tried this under TC13 x86:
Installed dillo onboot.
Marked dillo for removal.
    Apps listed it would remove:
                 ca-certificates, dejavu-fonts-ttf, dillo-beta, and wget
rebooted, desktop came up, fltk-1.3 was still present.

I could see this happening if all of the following were true:
  You are running Xvesa
  You are missing the  .dep  file for your window manager
  And fltk-1.3.tcz was included onboot

[destroyedlolo]

Oups, yes, sorry : it's TC 13.1, x86 version (32bits).

It's a stock install, I didn't modify anything so the environment is unchanged in term of GUI.

[rhermsen]

I'm getting an MD5 mismatch error for fltk-1.3.tcz.

I assume this thread is the reason fltk was updated...

Code: [Select]

$ tce-load -wi fltk-1.3.tcz
Downloading: fltk-1.3.tcz
Connecting to repo.tinycorelinux.net (128.127.66.77:80)
wget: server returned error: HTTP/1.1 416 Requested Range Not Satisfiable
fltk-1.3.tcz: FAILED
md5sum: WARNING: 1 of 1 computed checksums did NOT match
Error on fltk-1.3.tcz

$ cd /mnt/vda1/tce/optional/
$ ls -la flt*
-rw-rw-r--    1 tc       staff       466944 Feb 23 19:12 fltk-1.3.tcz
-rw-rw-r--    1 tc       staff           56 Feb 23 19:11 fltk-1.3.tcz.dep
-rw-rw-r--    1 tc       staff           47 Feb 23 19:12 fltk-1.3.tcz.md5.txt

$ md5sum -c fltk-1.3.tcz.md5.txt
fltk-1.3.tcz: FAILED
md5sum: WARNING: 1 of 1 computed checksums did NOT match


Based on a successful unsquash I get that the extension itself is ok.

Code: [Select]

$ tce-load -wi squashfs-tools.tcz
$ sudo unsquashfs fltk-1.3.tcz
$ sudo unsquashfs fltk-1.3.tcz
Parallel unsquashfs: Using 1 processor
6 inodes (207 blocks) to write
[================================================================================================|] 207/207 100%
created 3 files
created 4 directories
created 3 symlinks
created 0 devices
created 0 fifos

$ md5sum fltk-1.3.tcz
973f5025dae57ed7d201d91d44545833  fltk-1.3.tcz

$ cat fltk-1.3.tcz.md5.txt
ac00b0c19605f03990ac121584e7ea8e  fltk-1.3.tcz

As a workaround I created a new md5 hash.

Code: [Select]

$ md5sum fltk-1.3.tcz > fltk-1.3.tcz.md5.txt

$ tce-load -i fltk-1.3.tcz
fltk-1.3.tcz: OK

With this the desktop works again.

[Rich]

Hi rhermsen
MD5 files corrected. Thank you for reporting this.