Hi again everyone... I'm back with more questions
So...
I can connect to wifi in CorePlus.. No problem. And here's what I got when running
lspci
01:00.0 Network controller: Intel Corporation Wireless 8260 (rev 3a)
iwconfig
wlan0 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=-2147483648 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
dmesg
Intel(R) Wireless WiFi driver for Linux
iwlwifi 0000:01:00.0: Direct firmware load for iwlwifi-8000C-36.ucode failed with error -2
iwlwifi 0000:01:00.0: Falling back to sysfs fallback for: iwlwifi-8000C-36.ucode
iwlwifi 0000:01:00.0: Found debug destination: EXTERNAL_DRAM
iwlwifi 0000:01:00.0: Found debug configuration: 0
iwlwifi 0000:01:00.0: loaded firmware version 36.79ff3ccf.0 8000C-36.ucode op_mode iwlmvm
iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless AC 8260, REV=0x208
iwlwifi 0000:01:00.0: Applying debug destination EXTERNAL_DRAM
iwlwifi 0000:01:00.0: Allocated 0x00400000 bytes for firmware monitor.
iwlwifi 0000:01:00.0: base HW address: f0:d5:bf:a3:9f:b7
Now...
I want to make my own TinyCore version with wifi capability that have all firmwares, so it can work to almost any wifi capable pc/laptop/mac.
So I installed TCZs like in the CorePlus list. (tce-load -wi ---to make sure all necessary dep also gets downloaded)
wifi.tcz
iw.tcz
firmware-atheros.tcz
firmware-ipw2100.tcz
firmware-ipw2200.tcz
firmware-iwimax.tcz
firmware-iwl8000.tcz
firmware-iwl9000.tcz
firmware-iwlwifi.tcz
firmware-marvel.tcz
firmware-myri10ge.tcz
firmware-netxen.tcz
firmware-openfwwf.tcz
firmware-ralinkwifi.tcz
firmware-rtlwifi.tcz
firmware-ti-connectivity.tcz
firmware-ueagle-atm.tcz
firmware-vxge.tcz
firmware-zd1211.tcz
pci-utils.tcz
But...
there's no sign of any wifi/wireless thing in iwconfig, lspci or dmesg in my TinyCore version.
Did I miss any TCZ at all?
Thanks.