WelcomeWelcome | FAQFAQ | DownloadsDownloads | WikiWiki

Author Topic: FLWM at boot?  (Read 2325 times)

Offline kiwi

  • Newbie
  • *
  • Posts: 10
FLWM at boot?
« on: April 15, 2021, 11:52:41 AM »
Hi, I loaded piCore 13.0.3 on a 256MB microSD card for my Rpi Zero but was unable to load into the desktop environment. Am I missing an extension?


Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14851
Re: FLWM at boot?
« Reply #1 on: April 15, 2021, 11:56:15 AM »
Xorg, flwm, aterm and wbar

Offline kiwi

  • Newbie
  • *
  • Posts: 10
Re: FLWM at boot?
« Reply #2 on: April 15, 2021, 11:59:04 AM »
Thank you.

I found this http://forum.tinycorelinux.net/index.php/topic,24221.msg153184.html#msg153184 which I should have checked too before posting. My PiZero doesn't have networking (non-Wireless). Is it possible to load the .tcz files to the image so they can be loaded locally rather than from the network? If so, which directory?

Edit: I am not sure if the extensions are already on the image, or whether they are loaded from cmd or from network.

Thanks!
« Last Edit: April 15, 2021, 12:04:35 PM by kiwi »

Offline Juanito

  • Administrator
  • Hero Member
  • *****
  • Posts: 14851
Re: FLWM at boot?
« Reply #3 on: April 15, 2021, 12:03:34 PM »
Copy those extensions, their dep files and their dependencies to /mnt/mmcblk0p2/tce/optional

Offline kiwi

  • Newbie
  • *
  • Posts: 10
Re: FLWM at boot?
« Reply #4 on: April 15, 2021, 12:05:08 PM »
Copy those extensions, their dep files and their dependencies to /mnt/mmcblk0p2/tce/optional

Thank you, I will try that!

Offline kiwi

  • Newbie
  • *
  • Posts: 10
Re: FLWM at boot?
« Reply #5 on: April 19, 2021, 11:39:04 PM »
i got a write error but i think it may have been because i only had a 16MB partition (the sd card is 256MB)

so i followed this to get 173MB: https://iotbytes.wordpress.com/picore-tiny-core-linux-on-raspberry-pi/

Offline zach4tinycore

  • Newbie
  • *
  • Posts: 9
Re: FLWM at boot?
« Reply #6 on: May 02, 2021, 10:49:39 PM »
Kiwi check out my guide @ --> http://forum.tinycorelinux.net/index.php/topic,24974.0.html. Also, check out --> https://iotbytes.wordpress.com/picore-tiny-core-linux-on-raspberry-pi/ ( Will help you understand how to size your SD card ). Btw, get at least a 16GB SD card. They are super cheap on Amazon.