FLWM at boot?

[kiwi]

Hi, I loaded piCore 13.0.3 on a 256MB microSD card for my Rpi Zero but was unable to load into the desktop environment. Am I missing an extension?

[Juanito]

Xorg, flwm, aterm and wbar

[kiwi]

Thank you.

I found this http://forum.tinycorelinux.net/index.php/topic,24221.msg153184.html#msg153184 which I should have checked too before posting. My PiZero doesn't have networking (non-Wireless). Is it possible to load the .tcz files to the image so they can be loaded locally rather than from the network? If so, which directory?

Edit: I am not sure if the extensions are already on the image, or whether they are loaded from cmd or from network.

Thanks!

[Juanito]

Copy those extensions, their dep files and their dependencies to /mnt/mmcblk0p2/tce/optional

[kiwi]

Copy those extensions, their dep files and their dependencies to /mnt/mmcblk0p2/tce/optional

Thank you, I will try that!

[kiwi]

i got a write error but i think it may have been because i only had a 16MB partition (the sd card is 256MB)

so i followed this to get 173MB: https://iotbytes.wordpress.com/picore-tiny-core-linux-on-raspberry-pi/

[zach4tinycore]

Kiwi check out my guide @ --> http://forum.tinycorelinux.net/index.php/topic,24974.0.html. Also, check out --> https://iotbytes.wordpress.com/picore-tiny-core-linux-on-raspberry-pi/ ( Will help you understand how to size your SD card ). Btw, get at least a 16GB SD card. They are super cheap on Amazon.