Tiny Core Base > CorePlus

Problem with TC 12

<< < (2/3) > >>

Laskody:
Its solved! The problem was, that i Installed Tiny Core with boot-loader and marked the partition bootable. As  result, grub did not loaded the partition as root. So Premission denied for all. That was the Problem. I reinstall TC correctly and all right! Thank you verry much!

Laskody:
I would have one more question, I hope it's okay to ask that much.

I have a AMD/ATI RS780C (Radeon 3100) integrated videocard.

I want to install the driver for it,because it is slow and stutters when I scroll in the firefox webbrowser. i think, that is a driver problem. I set in Xvesa a high Screen Resolution its okay, but the problemi still have.

i found driver, xf86 ati, amdgpu and firmware. I tried one after the other but always black screen received. The Monitor say: "No signal".
I deleted it also and run tiny core with default.

my question would be how and which driver should i install?

Many thanks for our help!

Juanito:
You need to install Xorg-7.7 as well as the xf86-video driver for your hardware instead of Xvesa.

polikuo:

--- Quote from: Laskody on March 03, 2021, 01:47:13 PM ---Its solved! The problem was, that i Installed Tiny Core with boot-loader and marked the partition bootable. As  result, grub did not loaded the partition as root. So Premission denied for all. That was the Problem. I reinstall TC correctly and all right! Thank you verry much!

--- End quote ---

How exactly did you solve the problem ?

Judging from the grub code you provided, you most likely have a UEFI installation.

tc-install can't handle that.

Do you recall the steps it takes to get there ?

BTW, you won't need root=(UUID), we use tce=(UUID) instead.


--- Quote from: Laskody on March 05, 2021, 02:50:29 PM ---I have a AMD/ATI RS780C (Radeon 3100) integrated videocard.

...

my question would be how and which driver should i install?

--- End quote ---

Have you tried firmware-radeon.tcz and perhaps graphics-KERNEL.tcz ?

Laskody:
I installed TCE without bootloader and i not marked the partition bootable. (First was LMDE 4 installed with default grub on dev/sda1).

In the Debian system after TCE was installed on dev/sdb1, i editet the grub.d : (as root): nano /etc/grub.d/40_custom
and the entry:
https://pastebin.ubuntu.com/p/Nr4BkZ2Skn/

the uuid from dev/sdb1 founded with "blkid".

then "sudo update grub". After restart TC was in the Grub menü.

I tried firmware-raden.tcz but  graphics-KERNEL.tcz not, I'll try, Thank you!

Navigation

[0] Message Index

[#] Next page

[*] Previous page